User manual KENWOOD HB724 TRIBLADE,MV

[. . . ] Never remove the cover until the blade has completely stopped. important With heavy mixtures, don't use your hand blender for longer than 50 seconds in any four minute period - it'll overheat. Only use your hand blender for its intended domestic use. q q before plugging in Make sure your electricity supply is the same as the one shown on the power handle. [. . . ] Your hand blender complies with European Economic Community Directive 89/336/EEC. q 1 2 3 before using for the first time 1 Remove all packaging and throw away the blade covers. know your Kenwood hand blender hand blender speed buttons b power handle c blender shaft (removable) d beaker e beaker base/lid f cord clip chopper (HB630/HB640/HB724 TRIBLADE, MV/HB660 series) g chopper cover h chopper blade j bowl k bowl base/lid whisk (HB724 TRIBLADE, MV/HB660 series) l whisk collar m wire whisk a n q q q 4 for saucepan blending Take the pan off the heat and let it cool slightly. Otherwise your hand blender could overheat. Fit the power handle inside the blender shaft, turn and lock . To avoid splashing, place the blade in the food before switching on. Then press either speed button (use speed 1 for slower blending and to reduce splashing). Don't let liquid get above the join between the power handle and blender shaft. Move the blade through the food and use a stabbing action. If your blender gets blocked, unplug before clearing. (This stops the beaker sliding on the worktop. ) Don't fill the beaker above 700ml (24fl oz). 50 30 10 n q q k q q ml 50 0 30 0 10 0 q q cleaning q q q q Always switch off and unplug before cleaning. Take special care when preparing food for babies, the elderly and infirm. Always ensure that the hand blender shaft is thoroughly sterilised. Use a sterilising solution in accordance with the sterilising solution manufacturers instructions. Some foods, eg carrot, may discolour the plastic. Rubbing with a cloth dipped in vegetable oil helps remove discolouring. power handle, chopper cover, whisk collar Wipe with a damp cloth, then dry. Never immerse in water or use abrasives. blender shaft either Part-fill the beaker with warm, soapy water. [. . . ] blender shaft either Part-fill the beaker with warm, soapy water. Then insert the blender shaft and switch on. blender shaft, chopper blade, whisk, beaker, bowl, base/lids Wash up, then dry. [. . . ]