User manual KENWOOD HM-333

[. . . ] MICRO HI-FI COMPONENT SYSTEM HM-333 INSTRUCTION MANUAL KENWOOD CORPORATION COMPACT COMPACT DIGITAL AUDIO DIGITAL AUDIO TEXT B60-4976-00 01 MA (K, P, M, I, X, T, E2) AP 0011 2 Before applying power Caution : Read this page carefully to ensure safe operation. Before applying power Units are designed for operation as follows. AC 120 V only Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only *Other countries . . . . . . . . . . . . . . . . . AC 110-120 / 220-240 V switchable For the United Kingdom Factory fitted moulded mains plug 1. [. . . ] Set the recording condition. Select the reverse mode. ¡ set / demo Select an input source other than "TAPE" Example: To select the CD input CD 6 TAPE rec Pause the recording TAPE rec ÷ Press the TAPE rec key during recording. It stops after leaving a non-recorded blank of 4 seconds. (Press the key again to resume recording. ) \ volume / multi control 3 ÷ Check the tape transport direction before starting recording. If it is set to the reverse direction, only one side of tape can be recorded regardless of the reverse mode setting made here. ÷ The tape equalizer is defeated during recording. 4. Select the source to be recorded. CD TUNER (Broadcasts) AUX (External input) [Adjusting the AUX input level °] ÷ If a CD has already been loaded, it starts to play now. Press the 7 STOP key to stop it. CD Basic section The character information display shows the recording input source. 4 5. Start recording. 1 Press the TAPE rec key. 2 Play (or tune) the input source to be recorded. 5 ÷ Recording stops automatically when the tape side (s) to be recorded have been fully recorded. Stop the recording Lights 7 stop Tuning Mode 30 Points in CD recording When recording CD tracks onto a tape, if you leave the cassette deck in record-pause mode beforehand, the cassette deck recording can be started at the CD starts to be played. Recording on TAPE 1 Put the CD player in pause mode. 2 Select the track to be recorded with the skip (4, ¢) keys. (The CD player pauses at the beginning of the selected track. ) 3 Put the cassette deck in Record-pause mode. (Press TAPE rec key twice) 4 Start playing the CD. (Recording starts) ÷ To stop recording, press the 7 STOP key. Basic section Various CD playback features Listening to the desired sequence (program playback) Various CD playback features 31 Use the following procedure to program desired tracks in a desired order. (up to 32 tracks) Select the CD input. 1 Let the "PGM" indicator light. Press in stop mode PGM Lights PGM CD 2 Select track numbers in the order you want to play them. 1 Select the track. Selection of tracks 1 4 7 10 2 5 8 0 3 6 9 Program position of the track to be selected next. PGM CD Press the numeric keys as shown below. . . . 40 : +10 X 4, 0 (Go to step 2 within 20 seconds. ) 2 Confirm the selection. Application section SET (To select more than one track, repeat steps 1 and 2 for each track. ) 3 Start playback. CD 6 ÷ Up to 32 tracks can be programmed. When "PGM FULL" is displayed, no more tracks can be programmed. ÷ If you made a mistake, press the CLEAR key and enter the track No. is entered, the track will be added to the end of the existing program. ÷ When the total time of CD program is 256 minutes or more, the time display shows "- - : - -". ÷ Tracks will be played in the order they were programmed (following the program numbers). ÷ When the 4/ ¢ key is pressed during play, the program will jump to the preceding or the following track respectively. ÷ When the 4 key is pressed once during playback, the play position returns to the beginning of the current track being played. 32 Various CD playback features To add a track to an existing program 1 Select the track number to be added with the numeric keys. Press in stop mode 1 4 7 10 2 5 8 0 3 6 9 Press the numeric keys as shown below. . . . [. . . ] 87. 5 MHz ~ 108 MHz MW (AM) tuner section (For U. S. A. and Canada) Tuning frequency range . . . . . . . . . . and Europe) Tuning frequency range . . . . . . . . . . 531 kHz ~ 1, 602 kHz (For Australia) Tuning frequency range . . . . . . . . . . [. . . ]