User manual KENWOOD HM-337

[. . . ] HM-337 COMPACT Hi-Fi COMPONENT SYSTEM INSTRUCTION MANUAL KENWOOD CORPORATION B60-5467-18 01 C (E, M, X) 0312 Before applying power Caution : Read this page carefully to ensure safe operation. Units are designed for operation as follows. Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 240 V only Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · All tracks will be repeated continuously. · To cancel repeat play, repress repeat button (REPEAT button on the remote control) twice. Notes: · · · "P" represents PROGRAM. The program is automatically cleared as soon as the CD compartment is opened. The function of program setting is disabling in PLAY/ PAUSE mode. To repeat a single track Press REPEAT button twice in play or pause mode, the icon "REPEAT ONE" will appear on the display. · To cancel repeat play, repress repeat button (REPEAT button on the remote control) once. Random You can play all the tracks in random order. 1 During playing, pause or stop mode, press RANDOM button on the remote control to enable random play mode. The icon "RANDOM" will appear on the display. 2 To exit random mode, press RANDOM button again. The icon "RANDOM" will disappear from the display. Intro scan This function let you listen to the first 10 seconds of each track throughout the disc. Press INTRO button on the remote control to start scanning, and the icon "INTRO" will appear on the display. To stop the intro scan Press INTRO button on the remote control again. The unit enters normal play mode and starts playing from where you stop the scanning. Note: If the program function enabled, and the repeat function is set on, will disable the random play mode. 10 EN Using the radio Tuning in radio stations 1 Press TUNER/band button (TUNER/BAND button on the remote control) to select TUNER mode. The current radio frequency will be displayed. 2 Press TUNER/band button (TUNER/BAND button on the remote control) to select the desired waveband: FM or AM. 3 Press and hold 4 or ¢ button (4 or ¢ SEARCH/TUNING button on the remote control). Repeat this procedure until the desired station is reached. To tune to a weak station briefly press 4 or ¢ button (4 or ¢ SEARCH/TUNING button on the remote control) repeatedly until the display shows the desired frequency or when the best reception has been obtained. 6 Press program button (PROGRAM button on the remote control) again to store the radio station. Repeat steps 3 to 6 to store other preset radio stations. Note: During program, if no button is press within 20 seconds, the system will exit program mode automatically. Tuning to a preset radio station Press p. call + button (P CALL + button on the . remote control) or p. call ­ button (P CALL ­ button . on the remote control) to select the desired preset number. · The preset number and radio frequency will appear on the display. STEREO/MONO Press the STEREO/MONO button on the remote control to select stereo or mono mode. · When stereo mode is selected, the icon "STEREO" will appear on the display (if current station is FM stereo). Storing preset You can store up to 20 for FM and 20 for AM radio stations in the memory. [. . . ] +7 dB (60 Hz) Speakers Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bass-reflex type Speaker configuration Woofer . . . . . . . . . . . . . . . . . . . . . . . . 100 mm, cone type Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Maximum input level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]