User manual KENWOOD HM790

[. . . ] This handmixer complies with European Economic Community Directive 89/336/EEC. before using your handmixer for the first time Wash the parts (see 'cleaning'). Ensure the cord is fully unwound from the cord wrap before using the handmixer. Never put the handmixer body in water or let the cord or plug get wet. [. . . ] If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service). key speed switch tool release button beaters cord wrap kneader with additional collar kneader without additional collar beater storage pillars kneader storage pillars worktop storage unit cord clip to use your handmixer 1 Unwrap the cord from the cord wrap and make sure the speed switch is in the off position by lining up the O symbol on the handmixer body with the dot on the side of the speed switch. Insert the beaters or kneaders ­ turn and push until a positive click is felt. The tabs on the tool shafts need to line up with the outlet holes. Important: The kneader with the additional collar will only fit into the larger outlet hole. 3 With the ingredients in a suitably sized bowl, place the beaters/kneaders into the bowl. 4 Pull the speed switch backwards to reach the desired speed (the first dot on the handmixer body is slow and speed 5 is fast). Line up the dot on the side of the speed switch with the corresponding speed. As the mixture thickens, increase the speed. If the machine labours increase the speed. Move the speed switch forwards to the pulse position (P) to operate the motor as required. The motor will operate for as long as the pulse is held in position. 5 When the mixture has reached the desired consistency, return the speed switch to the off position and then lift the beaters/kneaders out of the bowl. 2 6 To remove the tools, make sure the speed switch is in the off position and unplug the handmixer. Hold onto the tool shafts when ejecting the tools. Important: When making bread dough we recommend that the dough load does not exceed 400g flour. With heavy mixtures, such as dough, don't use your handmixer for longer than 3 minutes in any 5 minute period as the protection device might operate. Switch it off as soon as you've got the right consistency. To protect your handmixer it is fitted with a protection device which will stop the handmixer operating if overloaded. [. . . ] other countries Contact the shop where you bought your handmixer. guarantee (UK only) If your handmixer goes wrong within one year from the date you bought it, we will repair or replace it free of charge provided: you have not misused, neglected or damaged it; it has not been modified (unless by Kenwood); it is not second-hand; it has not been used commercially; you have not fitted a plug incorrectly; and you supply your receipt to show when you bought it. This guarantee does not affect your statutory rights. cleaning Always switch off, unplug and remove the beaters or kneaders before cleaning. [. . . ]