User manual KENWOOD IH100

[. . . ] The hob plate will remain hot from residual heat. The pan and contents will remain hot after use. After removing the pan from the induction hob, place on a heat resistant surface. Do not scratch the hob plate with sharp objects. Don't use the hob plate as a worksurface. [. . . ] Metal cooking utensils are not recommended since they can be heated through the induction hob if left in the pan during cooking. before plugging in Make sure your electricity supply is the same as the one shown on the underside of your induction hob. Important ­ UK only The wires in the cord are coloured as follows: Blue = Neutral, Brown = Live. The appliance must be protected by a 13A approved (BS1362) fuse. Note: For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service). If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet. This machine complies with European Economic Community Directive 89/336/EEC. 3 before using your induction hob for the first time Wipe over the hob plate see `care & cleaning'. key hob plate pan guide control panel LED display timer decrease button timer increase button timer button on/off button power control As this induction hob operates slightly differently to a traditional hob, some adjustments to the expected cooking times and temperatures may be necessary to achieve the desired results. hints To reduce the cooking time, you can turn the power control to the max position when you turn the appliance on. After a short time you can set the power control to the required position. After a short period of use, experience will teach you which setting is the right one for your needs. Pan contents heat more quickly with an induction hob. using your induction hob 1 Plug in the induction hob. The appliance will beep and the fan will operate for a second. 2 Press the on/off button , the button will flash and the LED display will read ­­:­­. It will remain with this reading unless in timer mode. 3 Place the pan centrally onto the induction hob, within the pan guide shown by the graphic on the hob plate . 4 Select the desired power setting with the power control and heating will begin. To adjust the power, turn the power control anticlockwise to decrease the power and clockwise to increase the power. Note: When the induction hob is working, there will be a high frequency intermittent sound and the fan will operate. 5 Turn off the induction hob when you have finished cooking by pressing the on/off button. [. . . ] spares and attachments call 0870 2413653. other countries Contact the shop where you bought your machine. guarantee (uk only) If your induction hob goes wrong within one year from the date you bought it, we will repair or replace it free of charge provided: you have not misused, neglected or damaged it; it has not been modified (unless by Kenwood); it is not second-hand; it has not been used commercially; you have not fitted a plug incorrectly; and you supply your receipt to show when you bought it. This guarantee does not affect your statutory rights. 6 troubleshooting guide problems After the appliance is plugged in and the power button is pressed, no indicators are lit The power button indicator lights up, but heating does not start when power control is adjusted Heating stops suddenly during operation suggestions · Check that the plug is inserted correctly and that the power is switched on. [. . . ]