User manual KENWOOD JK340

[. . . ] Young children should be supervised to ensure they do not play with the appliance. Caution: Do not operate the kettle on an inclined surface. Cordless models: only use the powerbase supplied and keep it clean and dry. Make sure the lid is secure before switching the kettle on. [. . . ] G If you find drops of water under your kettle, don't worry - it is just condensation. G until it rests on the notch under the spout . G G G G boil-dry protection If you switch on with too little water, your kettle will cut out automatically. Switch off and let it cool down before re-filling. When it has cooled down, the switch will reset itself. For added safety your kettle is also fitted with a non re-setable thermal fuse. G G G G care and cleaning G G Before cleaning, unplug your kettle and let it cool down. the outside and powerbase Wipe with a damp cloth, then dry. Do not use abrasives - they will scratch the plastic surfaces. the inside Wipe with bicarbonate of soda on a damp cloth. Even though your kettle comes with a scale filter, you still need to clean the inside (and the filter) regularly. key lid catch water level gauge on/off switch with neon powerbase (JK740 series only) with multiposition cord exits compartment for excess cord scale filter descaling When limescale builds up on the heating element, buy a suitable descaler and descale your kettle. Limescale makes your kettle take longer to boil and can make the element burn out. After descaling, boil with fresh water several times and discard. Clean any descaler off the kettle - it can damage the parts. Some regions of the country have chalky water. This makes boiled water look cloudy and leaves a deposit on the side of the kettle. This is normal but can be removed with regular cleaning. Alternatively, to reduce limescale build up, use filtered water to fill your kettle. A range of Kenwood jug water filters are available. call Kenwood on 023 92392333 and ask for customer care. G G G to use your jug kettle 1 Fill it through the spout or lid. The water level must be between `MAX' and `MIN'. G Be economical: do not boil more water than you need. G To improve the quality of your drinks always use fresh water. [. . . ] Mix well and test the temperature with your elbow before you put baby in. run cold water over a burn immediately, then get medical help. Don't stop to remove clothing. If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer. UK If you need help with: using your kettle servicing or repairs (in or out of guarantee) call Kenwood customer care on 023 9239 2333. [. . . ]