User manual KENWOOD JK400

[. . . ] Before plugging in Make sure your electricity supply is the same as the one shown on the underside of your kettle. This kettle complies with European Economic Community Directive 89/336/EEC. safety G G G ብ ቤ G G G G ቧ G G G G G ቨ G G G G G G ᕢ ᕡ ᕣ Always use the filter and never overfill - boiling water may splash out. [. . . ] G To open the lid, push the lid release and pull the lid back ᕡ. 2 The water level must be between ‘MAX’ and 200mls. G Be economical: do not boil more water than you need. G To improve the quality of your drinks always use fresh water. 4 Plug in and switch on, the inside of the kettle will illuminate and the indicator light will come on. 5 Your kettle will boil and switch off automatically. To re-boil, wait a few seconds - the on/off switch needs time to reset. 2 G G G If you experience problems with your kettle switching on and off during use or switching off before boiling, check that the flat element is free from scale - see “descaling”. Your kettle is fitted with a filter to hold back limescale particles. If you find drops of water under your kettle, don’t worry - it is just condensation. Boil-dry protection If you switch on with too little water, your kettle will cut out automatically. Switch off, remove from the powerbase and let it cool down before re-filling. When it has cooled down, the switch will reset itself. descaling G G care and cleaning G Before cleaning , unplug your kettle and let it cool down. [. . . ] Or when descaling your kettle, drop the filter in too. 4 To re-fit the filter, slide it in until it rests on the notch under the spout ᕣ. Service and customer care G If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer. [. . . ]