User manual KENWOOD JK60

[. . . ] Young children should be supervised to ensure they do not play with the appliance. Caution: Do not operate the kettle on an inclined surface. Make sure the lid is secure before switching the kettle on. Warning: Do not open the lid while the water is boiling. [. . . ] 6 Your kettle will boil and switch off automatically. To re-boil, wait a few seconds - the on/off switch needs time to reset. G If you experience problems with your kettle switching on and off during use or switching off before boiling, check that the flat element is free from scale - see "descaling". If descaling does not solve the problem contact Kenwood customer care. G Take care when using the cups and do not overfill above the inner rim (approx. G Your kettle is fitted with a scale filter to hold back limescale particles. G If you find drops of water under your kettle, don't worry - it is just condensation. G approximate boiling times 220/240 volts approx 5 minutes for 450 mls (maximum) 110/120 volts approx 5 minutes 40 seconds for 450 mls (maximum) care and cleaning G G G G G Before cleaning, unplug your kettle and let it cool down. The cups and spoons can be placed in the kettle for compact storage. Wrap the cord around the kettle and secure using the cord clip . the outside Wipe with a damp cloth, then dry. Do not use abrasives - they will scratch the plastic surfaces. the inside Wipe with bicarbonate of soda on a damp cloth. Even though your kettle comes with a scale filter, you still need to clean the inside (and the filter) regularly. G G G G G G G key lid on/off switch neon light water level gauge scale filter 2 cups 2 spoons dual voltage selector cord clip the scale filter 1 Open the lid. 3 either rinse under the tap or use a soft brush. or when descaling your kettle, drop the filter in too. 4 To re-fit the scale filter, slide it in until it rests on the notch under the spout . max max boil-dry protection If you switch on with too little water, your kettle will cut out automatically. Switch off and let it cool down before re-filling. When it has cooled down, the switch will reset itself. 2 2 2 descaling Regular descaling of the flat element will improve the performance of your kettle. If the kettle is not descaled regularly the build up of limescale may result in the following: G problems may be experienced with the kettle switching on and off during use or switching off before boiling. Please note: not descaling your kettle may invalidate your guarantee. G When limescale starts to build up on the heating element, buy a suitable descaler and descale your kettle. After descaling, boil with fresh water several times and discard. [. . . ] Mix well and test the temperature with your elbow before you put baby in. run cold water over a burn immediately, then get medical help. Don't stop to remove clothing. If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer. UK If you need help with: using your kettle servicing or repairs (in or out of guarantee) call Kenwood customer care on 023 9239 2333. [. . . ]