User manual KENWOOD KCA-DR300

[. . . ] 24 1 Getting to know the recorder NOTE: The screenshots and other presentations shown in this manual may differ from the actual screens and presentations generated by the actual product. LCD screen Function keys LED indicator 1 Indicates the system status of the recorder. Power key Memory card slot Videos are recorded to a MicroSD card. Microphone 3 4 5 6 7 8 9 10 11 Allows you to record the video with sounds. [. . . ] ƒƒ If you want to manually activate Parking mode while continuous recording is in progress, press . 12 To stop Parking mode and resume continuous recording , press . ƒƒ Once the movements were detected and recorded during Parking mode, you will be asked to watch the video when you stop Parking mode. Follow the on-screen prompts to watch videos or resume continuous recording. ƒƒ The parking recordings can be found in the “Parking” category for file playback. Camera mode The recorder allows you to take a photo. ƒƒ If the recording is in progress, press to take a photo. ƒƒ The photos can be found in the “Photo” category for file playback. Select the desired type and press recordings), Emergency, Parking (parking recordings) and Photo. Use the / key to select the desired file from the list, and then press playback. During playback, you can: ƒƒ Press to return to the list. Press 13 to ƒƒ While playing videos, press Pause or Delete the file. For more information on playback, see the "Playback mode" section. ƒƒ Sound Recording Sets if you want to include sounds in the recordings. ƒƒ Parking Mode Allows you to change the settings of Parking mode. the available settings include: - Detection: Select On or Off. When enabled, the recorder will start recording automatically when it detects movements or if an event happens in Parking mode. ƒƒ Video Recording Changes the settings of recording, including: - Video Clip Length: Sets the length of each video clip for a continuous recording (1 min, 3 min or 5 min). - EV: Sets the proper exposure level (-1 ~ +1) to adjust the brightness of the image. - GPS Stamp: Sets if and how you want to record the GPS information. 14 ƒƒ G-Sensor Sensitivity The G sensor detects the car's movement forwards/backwards (X), to the right/left (Y), and upwards/downwards (Z). In case of an event, the G sensor will prompt the recorder to start recording automatically. [. . . ] ƒƒ Never clean your device with it powered on. Use a soft, lint-free cloth to wipe the screen and the exterior of your device. ƒƒ Do not use paper towels to clean the screen. ƒƒ Never attempt to disassemble, repair or make any modifications to your device. [. . . ]