User manual KENWOOD KCA-RC547

[. . . ] · When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. · Characters that conform to ISO 8859-1 can be displayed. · Characters that conform to ISO 8859-5 or ISO 88591 can be displayed. Refer to 38 Russian language setting of <Function setting> (page 16). [. . . ] Selecting "YES" and then pressing [ENTER] button starts upgrading the firmware. For how to update the firmware, access our web site. http://www. kenwood. com/cs/ce/ Demo Mode Settings 47 Demo Mode: "DEMO Mode" "ON", "OFF" Specifies whether to enable demonstration. English | 19 Function setting 58 Setting the Time Interval for Automatic Answer: "Auto Answer" "OFF", "0SEC" ­ "8SEC" ­ "99SEC" This function automatically answers (responds to) a call after lapse of the preset time interval for automatic answer. "OFF" : Does not answer the phone call automatically. "0" : Automatically answers the phone call at once. "1s" ­ "99s" : Automatically answers the phone call after lapse of 1 ­ 99 seconds. 59 Speaker Select: "Bluetooth HF/Audio" "Front", "All" You can specify output speakers for hands-free voice communication and Bluetooth audio sound. "Front" : Outputs sound from the front speakers. "All" : Outputs sound from the front and rear speakers. 60 Setting the Beep of the Incoming Call: "Call Beep" "ON", "OFF" You can output a beep from the speaker when a call comes in. 61 BT F/W Update: "BT F/W Update" Displays the firmware version and update the firmware. Displays the spectrum analyzer. Selecting Text Display Changes displayed information on each of the following sources: 1 Enter Display control mode KDC-5047U KCA-RC547 Press the [DISP] button. KDC-BT50U 1) Press the [FNC] button. 2) Turn the Control knob to select "Display Control", and then press the [ENTER] button. In Tuner source Information Frequency & Program Service name (FM) Title & Artist name* (FM) Station name* (FM) Radio text plus* (FM) Radio text (FM)* Frequency (MW, LW) Spectrum analyzer & Clock Date Displays the status (Type A display only) Blank In CD & External disc source Information Disc title Track title Play time Spectrum analyzer & Clock Date Displays the status (Type A display only) Blank In Audio file/ iPod source Information Title & Artist name Album & Artist name Folder name File name Play time Spectrum analyzer & Clock Date Displays the status (Type A display only) Blank Display "Frequency/PS" "Title/Artist" "Station Name" "Radio Text Plus" "Radio Text" "Frequency" "Speana/Clock" "Date" "Indicator" "Blank" 2 Select Display type Turn the Control knob to select Display type, and then press the [ENTER] button. *Information of Radio text plus is displayed. 3 Select Display information item Turn the Control knob to select Display information item, and then press the [ENTER] button. The following display information items can be set: · Side display selection (When selecting Display type A, B, D, or E. ) Select the "DISP Side Select" display. Refer to 09 Display Side Selection of <Function setting> (page 16). · Text display selection (When selecting Display type A or B. ) Select the "DISP Text Select" display. Refer to <Selecting Text Display> (page 22). · Graphic selection (When selecting Display type E. ) Select the "DISP GRPHC Select" display. Refer to 11 Display Graphic Selection of <Function setting> (page 16). Display "Disc Title" "Track Title" "P-Time" "Speana/Clock" "Date" "Indicator" "Blank" Display "Title/Artist" "Album/Artist" "Folder Name" "File Name" "P-Time" "Speana/Clock" "Date" "Indicator" "Blank" 4 Exit Function setting mode Press the [ ] button for at least 1 second. In Bluetooth Audio "BT Audio" (KDC-BT50U)/ "BT Audio EXT" (KCA-BT200; Optional accessory) source Information Display Source name "Source Name" Title & Artist name (KDC-BT50U only) "Title/Artist" Album & Artist name (KDC-BT50U only) "Album/Artist" Spectrum analyzer & Clock "Speana/Clock" Date "Date" Displays the status (Type A display only) "Indicator" Blank "Blank" 22 | KDC-BT50U/ KDC-5047U/ KCA-RC547 In Standby/ Auxiliary input source Information Display Source name "Source Name" Spectrum analyzer & Clock (AUX only) "Speana/Clock" Clock (Standby only) "Clock" Date "Date" Displays the status (Type A display only) "Indicator" Blank "Blank" Function of KDC-BT50U/ KDC-5047U Illumination Color Selection Selecting the Illumination Color of the panel. 1 Enter Function setting mode Press the [FNC] button. 2 Select Color select mode The item can be selected and determined as follows. "Settings" "DISP & ILLUMI" "Color SEL" To select the item, turn the Control knob. To determine the item, press the [ENTER] button. 1 Enter Display control mode KDC-5047U KCA-RC547 Press the [DISP] button. KDC-BT50U 1) Press the [FNC] button. 2) Turn the Control knob to select "Display Control", and then press the [ENTER] button. 3 Select the part where you want to set the Illumination Color Part All Button Control knob USB/ Auxiliary Terminal Display "All" "Key" "Rotary" "USB & AUX" 2 Select the Display type Turn the Control knob to select Display type A or B, and then press the [ENTER] button. 3 Select Text display selection mode Turn the Control knob to select "DISP Text Select", and then press the [ENTER] button. Turn the Control knob to select part, and then press the [ENTER] button. 4 Select the text display part (Display type A only) Push the Control knob towards up or down. [. . . ] Voice is too large to be recognized. English | 37 Specifications FM tuner section Frequency range (50 kHz step) : 87. 5 MHz ­ 108. 0 MHz Usable sensitivity (S/N = 26dB) : 0. 7 V/75 Quieting Sensitivity (S/N = 46dB) : 1. 6 V/75 Frequency response (±3. 0 dB) : 30 Hz ­ 15 kHz Signal to Noise ratio (MONO) : 65 dB Selectivity (DIN) (±400 kHz) : 80 dB Stereo separation (1 kHz) : 35 dB CD player section Laser diode : GaAlAs Digital filter (D/A) : 8 Times Over Sampling D/A Converter : 24 Bit Spindle speed : 500 ­ 200 rpm (CLV) Wow & Flutter : Below Measurable Limit Frequency response (±1 dB) : 10 Hz ­ 20 kHz Total harmonic distortion (1 kHz) : 0. 008 % Signal to Noise ratio (1 kHz) : 110 dB Dynamic range : 93 dB MP3 decode : Compliant with MPEG-1/2 Audio Layer-3 WMA decode : Compliant with Windows Media Audio AAC decode : AAC-LC ". m4a" files MW tuner section Frequency range (9 kHz step) : 531 kHz ­ 1611 kHz Usable sensitivity (S/N = 20dB) : 25 µV LW tuner section Frequency range : 153 kHz ­ 279 kHz Usable sensitivity (S/N = 20dB) : 45 µV USB Interface USB Standard : USB1. 1/ 2. 0 (Full speed) File System : FAT16/ 32 Maximum Supply current : 500 mA MP3 decode : Compliant with MPEG-1/2 Audio Layer-3 WMA decode : Compliant with Windows Media Audio AAC decode : AAC-LC ". m4a" files Bluetooth section (KDC-BT50U) Version : Bluetooth Ver. 2. 1 + EDR Certified Frequency range : 2. 402 ­ 2. 480 GHz Output Power : +4dBm (MAX), 0dBm (AVE) Power Class 2 Maximum Communication range : Line of sight approx. 10m (32. 8 ft) Profiles : HFP (Hands Free Profile) : HSP (Headset Profile) : SPP (Serial Port Profile) : A2DP (Advanced Audio Distribution Profile) : AVRCP (Audio/Video Remote Control Profile) : PBAP (Phonebook Access Profile) : OPP (Object Push Profile) : SYNC (Synchronization Profile) : MAP (Message Access Profile ) Audio section Maximum output power : 50 W x 4 PWR DIN45324, +B=14. 4V : 30 W x 4 Speaker Impedance :4­8 Tone action Bass : 100 Hz ±8 dB Middle : 1 kHz ±8 dB Treble : 12. 5 kHz ±8 dB Preout level / Load (CD) : 2500 mV/10 k Preout impedance : 600 38 | KDC-BT50U/ KDC-5047U/ KCA-RC547 Auxiliary input Frequency response (±3 dB) : 20 Hz ­ 20 kHz Input Maximum Voltage : 1200 mV Input Impedance : 10 k General Operating voltage KDC-BT50U : 14. 4 V (10. 5 ­ 16V allowable) KDC-5047U/ KCA-RC547 : 14. 4 V (11 ­ 16V allowable) Maximum Current consumption : 10 A Installation Size (W x H x D) : 182 x 53 x 155 mm Weight : 1. 3 kg Specifications subject to change without notice. English | 39 This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State. Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. [. . . ]