User manual KENWOOD KDC-130Y

[. . . ] Indd 1 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 16/10/2013 12:18:12 PM Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. [. . . ] € For USB: Only for files registered in the database created with KME Light/ KMC. Random play *3 *1 You can still play/pause, file search, fast-forward or reverse files from the unit. If you connect the iPod/iPhone to the USB input terminal of the unit (while listening to TuneIn, TuneIn Radio Pro or Aupeo), the unit will output the sound from these apps. ( 5) Set the skip search ratio While listening to iPod or KME Light/ KMC file. 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [USB], then press the knob. 3 Turn the volume knob to select [SKIP SEARCH], then press the knob. 4 Turn the volume knob to make a selection, then press the knob. 5% (default)/ 1%/ 5%/ 10%: Skip search ratio over the total files. 2 Press the number buttons to enter a track/ file number. Auxiliary input jack 3 Press ENT  Select a song by name While listening to iPod. (or using RC-406) 1 Press AUD to enter [AUDIO CONTROL]. 2 Press / to make a selection, then press ENT  . To return to the previous setting item or hierarchy, press . SOUND RECNSTR (Sound reconstruction) –8 to +8 (+6): –8 to +8 (+5): –8 to +8 (0): FADER BALANCE VOLUME OFFSET (Default: 0) Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust. (Select [USER] to use the customized bass, middle, and treble settings. ) [DRIVE EQ] is a preset equalizer that reduces noise from the road. LV1/ LV2: Selects your preferred low and high frequencies boost to produce a well-balanced sound at a low volume level. BASS BOOST LOUDNESS SUBWOOFER SET* LPF SUBWOOFER* THROUGH: All signals are sent to the subwoofer.  ; 85HZ/ 120HZ/ 160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are sent to the subwoofer. SUB-W PHASE* REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. [. . . ] Basic procedure 1 Remove the key from the ignition switch, then disconnect the terminal of the car battery. How to remove the unit 1 Detach the faceplate. 2 Fit the catch pin on the extraction keys into the holes on both sides of the trim plate, then pull it out. 3 Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the right. [. . . ]