User manual KENWOOD KDC-138

[. . . ] KDC-MP238/CR KDC-MP208 KDC-138/CR CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D’EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. [. . . ] select the “CODE CLR” display. 2 Enter Security Code mode Press the center of the Control knob for at least 1 second. when “ENTER” is displayed , “CODE CLR” is also displayed. 3 Select the digits to enter Press the right or left side of the Control knob. 4 Select the Security Code numbers Press the top or bottom side of the Control knob. 10 5:07:29 PM Menu Operation Function of KDC-MP238/KDC-MP238CR/KDC-MP208 Function of KDC-MP238 Auxiliary Input Display Setting Selecting the display when changing to Auxiliary input source. receive mode Setting Setting the receiver mode. 1 Select the Receive mode Press the top or bottom side of the Control knob. 2 Enter Receive mode Press the center of the Control knob for at least 1 second. 3 Set the Receive mode Press the top or bottom side of the Control knob. 3 Select Auxiliary input display setting mode Press the top or bottom side of the Control knob. select the “NAME SET” display. 4 Enter Auxiliary input display setting mode Press the center of the Control knob for at least 1 second. 5 Select the Auxiliary input display Press the right or left side of the Control knob. Each time you push the knob, the display alternates as listed below. • “AUX” • “DVD” • “PORTABLE” • “GAME” • “VIDEO” • “TV” Function of KDC-MP238/KDC-MP238CR/KDC-MP208 Demonstration mode Setting Sets the demonstration mode. 1 Select the Demonstration mode Press the top or bottom side of the Control knob.  • When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes. € The Auxiliary input display can be set only when the built-in auxiliary input or the auxiliary input of optional KCA-S220A is used. 2 Set the Demonstration mode Press the center of the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below. For more information, refer to the instruction manual of Bluetooth HANDS FREE BOX. [. . . ] ˜ Eject the disc magazine and check the number for the specified disc. PROTECT/DCER: The speaker wire has a short-circuit or touches the chassis of the vehicle, and then the protection function is activated. ž Wire or insulate the speaker cable properly and press the reset button. If the “PROTECT”/“DCER” code does not disappear, consult your nearest service center. [. . . ]