User manual KENWOOD KDC-2021S

[. . . ] KDC-2021S CD-RECEIVER INSTRUCTION MANUAL B64-2232-00 (EY) Contents English Safety precautions. . . . . . . . . . . . . . . . . . . . . . 3 About CDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 General features . . . . . . . . . . . . . . . . . . . . . . . . . 6 Power Selecting the Source Volume Attenuator Loudness System Q Audio Control Speaker Setting Clock Display Adjusting Clock DSI (Disabled System Indicator) Theft Deterrent Faceplate TEL Mute CD player features . . . . . . . . . . . . . . . . . . . . 11 Playing CD Fast Forwarding and Reversing Track Search Track Repeat Track Scan Random Play Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Installation Procedure. . . . . . . . . . . . . . . 13 Connecting Wires to Terminals . 14 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Troubleshooting Guide. . . . . . . . . . . . . . 17 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Tuner features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Tuning Mode Tuning Monaural Reception Station Preset Memory Auto Memory Entry Preset Tuning --2-- Safety precautions 2WARNING To prevent injury and/or fire, take the following precautions: · Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. · When extending the ignition, battery or ground wires, make sure to use automotivegrade wires or other wires with an area of 0. 75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating. · To prevent short circuits, never put or leave any metallic objects (e. g. , coins or metal tools) inside the unit. [. . . ] For that reason, keep the faceplate in 1 Select the clock display Press the [CLK] button. --8-- Tuner features its special storage case while detached. · Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. AM FM/ MONO 4¢ Reattaching the Faceplate 1 Align the projections on the unit with the grooves on the faceplate. SRC #1 - 6 AUTO/ AME 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. The "CALL" display disappears and the audio system comes back ON. ST indicator Preset station number Monaural indicator Band display AUTO indicator Frequency display --9-- Tuner features English Tuning Mode Choose the tuning mode. Each time the button is pressed shown below. Tuning mode Display Auto seek "AUTO 1" indicator Preset station "AUTO 2" seek indicator Manual -- the Tuning mode switches as Operation Automatic search for a station. Search in order of the stations in the Preset memory. When it's ON, the Monaural indicator is ON. Station Preset Memory Putting the station in the memory. 1 2 3 Select the band Press the [FM] or [AM] button. Select the frequency to put in the memory Press the [4] or [¢] button. Put the frequency in the memory Press the [#1] -- [#6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [#1] -- [#6] button. Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. Press the [4] or [¢] button. -- 12 -- Accessories External view 1 Number of items 2CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the -terminal of the battery. Make the proper input and output wire connections for each unit. [. . . ] The ignition and battery wire are incorrectly connected. 11 Connect the wire correctly, referring to the section on <Connecting Wires to Terminals>. The sound quality is poor or distorted. 25 One of the speaker wires is being pinched by a screw in the car. The speakers are not wired correctly. 27 Reconnect the speaker wires so that each output terminal is connected to a different speaker. ? The Touch Sensor Tone doesn't sound. 34 The preout jack is being used. The Touch Sensor Tone can't be output from the preout jack. ? Tuner source ? Radio reception is poor. 39 The car antenna is not extended. The antenna control wire is not connected. 40 Connect the wire correctly, referring to the section on <Connecting Wires to Terminals>. ? The TEL mute function does not work. 15 The TEL mute wire is not connected properly. [. . . ]