User manual KENWOOD KDC-2029

[. . . ] Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. The functions you can use and the information that can be displayed may differ depending on the models being connected. · You can damage both your unit and the CD changer if you connect them incorrectly. 2CAUTION To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. [. . . ] With the [4] of the Control knob, you move to the previous folder, and with the [¢] of the Control knob, to the next folder. Returning to the top level* Press the [3] button. · * You can operate this function when <Switching the Play mode> (page 28) is set to "Folder Mode" while playing ACDrive disc. (KDC-W808 only) 3 Decide the folder to play Press the Control knob. The Folder Select mode releases, and the Audio file in the folder being displayed plays. Cancelling the Folder Select mode Press the [F. SEL] button. 55 · The category information of each song is the data registered in Media Manager when ACDrive disc is being generated. · You can cancel the announcement made when the mode is changed by <Voice Index> (page 37). · You can select the advancement of the Play mode information by [AM] and [FM] keys. Function of the KDC-W808 Function of ACDrive disc Letter Seek You can search for the song, you want to play, by selecting the initial of Genre name, Artist name, or Album name. 1 Enter the Letter Seek mode Press the [S. MODE] button for at least 1 second. · This operation does not function when <Disc Random Play> (page 27) is ON. · This function is available only when the Play mode is set Genre, Artist, or Album. Cancelling the Letter Seek Press the [S. MODE] button. 28 | English 2 Start the Letter Seek Push the Control knob towards [4] or [¢]. The initial of Genre name, Artist name, or Album name is displayed and announced in order. · The announcement of the initial can be canceled by <Voice Index> (page37). · When you push the Control knob to the reverse [4] or [¢] during Letter Seek, the initial is displayed and announced in the reversed order. · Once Letter Seek starts, it cannot be cancelled. Character type Alphabet upper case Alphabet lower case Numbers and symbols Special characters (Accent characters) 7 Select the characters Push the Control knob towards [FM] or [AM]. 8 Repeat steps 5 through 7 and enter the name. 9 Exit Menu mode Press the [MENU] button. · When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. When "Menu" is displayed, "Security" is displayed. In Standby mode 3 Enter Security Code mode Press the Control knob for at least 1 second. When "Enter" is displayed, "CODE" is also displayed. Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "Beep:ON" "Beep:OFF" Setting Beep is heard. Beep canceled. 4 Select the digits to enter Push the Control knob towards [4] or [¢]. 5 Select the Security Code numbers Push the Control knob towards [FM] or [AM]. 6 Repeat steps 4 and 5, and complete the Security Code. In Standby mode Manual Clock Adjustment · You can do this adjustment when the <Synchronize Clock> (page 33) is set as OFF. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "Re-Enter" is displayed, "CODE" is also displayed. 1 Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the "Clock Adjust" display. 8 Do the step 4 through 7 step operation, and reenter the security code. The Security Code function activates. · If you enter a Code different from your Security Code, you have to start over from step 4. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Push the Control knob towards [FM] or [AM]. Adjust the minutes Push the Control knob towards [4] or [¢]. Press the Reset button when the audio unit is removed from the battery power source 1 Turn the power ON. 32 | English 4 Exit Clock adjustment mode Press the [MENU] button. In Standby mode Synchronize Clock Synchronizing the RDS station time data and this unit's clock. In Standby mode Date Adjustment 1 Select Date Adjust mode Push the knob towards [FM] or [AM]. Select the "Date Adjust" display. Display "SYNC:ON" "SYNC:OFF" Setting Synchronizes the time. Adjust the time manually. · It takes 3 to 4 minutes to synchronize the clock. 2 Enter Date Adjust mode Press the Control knob for at least 1 second. [. . . ] ? 46 | English The messages shown below display your systems condition. Eject: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. No disc has been loaded in the disc magazine. No disc has been loaded in the disc magazine. [. . . ]