User manual KENWOOD KDC-210U

[. . . ] KDC-210U CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D’EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. [. . . ] Auxiliary input jack Start listening 1 Open the Pandora application on your device. 2 Connect your device to the USB input terminal. 5 mm (1/8") stereo mini plug with “L” shaped connector (commercially available) Portable audio player USB input terminal 1 Press and hold the volume knob. 2 Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then press the knob. A new station is created based on the current song or artist. Save a station Press and hold number button 3, 4 or 5 to store. 3 Turn on the portable audio player and start playback. kCA-iP102 (optional accessory)* The source changes to PANDORA and broadcast starts. * To connect devices featuring Lightning connector, both KCA-iP102 (optional accessory) and Apple Lightning to 30-pin Adapter (accessory of the iPod/iPhone) are required. Do not leave the Apple Lightning to 30-pin Adapter inside the car to prevent damages caused by the hot temperature. Set the AUX name While listening to a portable audio player connected to the unit. 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [SETTINGS], then press the knob. 3 Turn the volume knob to select [AUX NAME], then press the knob. 4 Turn the volume knob to make a selection, then press the knob. 2 Turn the volume knob to make a selection, then press the knob (or press 5/∞ on RC-406). 3 Turn the volume knob to the desired station, then press the knob. Indd 8 4/25/13 11:56:26 AM Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) AUDIO SETTINGS While listening to any source. 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [AUDIO CTRL], then press the knob. 3 Turn the volume knob to make a selection (see the following table), then press the knob. Repeat step 3 until the desired item is selected or activated. [. . . ] Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 5/9/13 9:44:27 AM Wiring connection Rear/subwoofer output Antenna terminal Fuse (10 A) Part list for installation A Faceplate If no connections are made, do not let the wire come out from the tab. White To front speaker (left) White/Black Gray To front speaker (right) Gray/Black Green To rear speaker (left) Green/Black Purple To rear speaker (right) Ignition switch Car fuse box Red (Ignition wire) Yellow Car fuse box (Battery wire) Black (Ground wire) Battery To the metallic body or chassis of the car Blue (Antenna control wire) (Not used) Purple/Black Brown (Mute control wire) Blue/White (Power control wire) To the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle. B Trim plate C Mounting sleeve To the terminal that is grounded when the telephone rings or during conversation. (To connect the Kenwood navigation system, refer your navigations manual. [. . . ]