User manual KENWOOD KDC-226

[. . . ] · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] Each time the button is pressed the character typed switches as shown below. Character type Alphabet upper case Alphabet lower case Numbers and symbols Special characters (Accent characters) 5 Select the characters Press the [FM] or [AM] button. 6 Repeat steps 3 through 5 and enter the name. 7 Exit name set mode Press the [NAME. S] button. · When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. · Media that you can attach names to - Internal CD player: 30 discs. - External CD changer/ player: Varies according to the CD changer/ player. · The name of a CD can be changed by the same operation you used to name it. Text/Title Scroll Scrolling the displayed CD text, MP3/WMA text, or MD title. Press the [SCRL] button for at least 1 second. English | 21 Menu system SRC MENU FM AUD SRC AM 38 MENU SCAN RDM REP F. SEL M. RDM FM AM 4/¢ 1­6 Menu display NEWS indicator RDS indicator Menu System Setting during operation beep sound etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 4 Exit Menu mode Press the [MENU] button. · When other items that are applicable to the basic operation method above are displayed afterwards their setting content chart is entered. (Normally the uppermost setting in the chart is the original setting. ) Also, the explanation for items that aren't applicable ('Manual Clock Adjustment' etc. ) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Press the [FM] or [AM] button. LED OFF. Quick call up the preset color Press the desired [1] -- [4] button. Button [1] [2] [3] [4] Color Silky White Red Blue Blue Green Selectable Illumination Selecting the button illumination color as green or red. Display "Color Red" "Color Green" Setting The illumination color is red. The illumination color is green. Selecting the Color mode Press the [6] button. Each time the button is pressed the Color mode switches as shown below. Display "Scan" "SRC" "Time" Color mode The color changes in sequence. The color changes according to the selected source. Keeps the presently set color. Switching Display Type Setting the Display type. Display "DisplayC" "DisplayA" "DisplayB" Setting Demonstration. Silent display type. Blue fine adjustment 1 Press the [3] button for at least 2 seconds. When the blue fine adjustment is completed, press the [3] button. 24 | English Contrast Adjustment Adjusting the display contrast. [. . . ] -- There are times when it isn't displayed correctly according to the MP3/WMA recording conditions. ? ? ? ? If the following situations, consult your nearest service center: Even though the disc changer is connected, the Disc Changer source is not ON, with "AUX EXT" showing in the display during the Changer Mode. ? ?? 34 | English The messages shown below display your systems condition. EJECT: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. No disc has been loaded in the disc magazine. [. . . ]