User manual KENWOOD KDC-258U

[. . . ] KDC-258U KDC-158U KDC-118U CD-RECEIVER KDC-MP258U KDC-MP158U INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D’EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. [. . . ] To return to the previous setting item or hierarchy, press . 1 Press 2 Turn the volume knob to select a category, then press the knob. 3 Turn the volume knob to the desired station, then press the knob. When a city list appears, you can skip cities in alphabetical order. (or using RC-406) Press / to search for a station. Indd 9 9 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 11/9/2013 3:47:25 PM AUDIO SETTINGS While listening to any source. 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [AUDIO CONTROL], then press the knob. 3 Turn the volume knob to make a selection (see the following table), then press the knob. Repeat step 3 until the desired item is selected or activated. (or using RC-406) 1 Press AUD to enter [AUDIO CONTROL]. 2 Press / to make a selection, then press ENT . To return to the previous setting item or hierarchy, press . default: XX SUB-W LEVEL BASS LEVEL MID LEVEL TRE LEVEL PRESET EQ –15 to +15 (0): Adjusts the subwoofer output level. €8 to +8 (+6): –8 to +8 (+5): –8 to +8 (0): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust. ) SUB-W PHASE REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [LPF SUBWOOFER]. ) R15 to F15 (0): Adjusts the rear and front speaker output balance. l15 to R15 (0): Adjusts the left and right speaker output balance. €8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume adjustment level of each source. (Before adjustment, select the source you want to adjust. [. . . ] Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 11/9/2013 3:47:26 PM Wiring connection KDC-258U KDC-158U KDC-118U KDC-MP258U KDC-MP158U Part list for installation (A) Faceplate Rear/ subwoofer output Antenna terminal Front output Rear/ subwoofer output Fuse (10 A) (B) Trim plate If no connections are made, do not let the wire come out from the tab. White To front speaker (left) White/Black Gray To front speaker (right) Gray/Black Green To rear speaker (left) Green/Black Purple To rear speaker (right) Ignition switch Car fuse box Red (Ignition wire) Yellow Car fuse box (Battery wire) Black (Ground wire) Battery To the metallic body or chassis of the car Purple/Black Light blue/yellow (Steering remote control wire) For KDC-MP258U / KDC-MP158U : To the steering wheel remote control adapter (C) Mounting sleeve Blue/White (Power control wire) To the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle. (D) Wiring harness To the terminal that is grounded when the telephone rings or during conversation. (To connect the Kenwood navigation system, refer your navigations manual. [. . . ]