User manual KENWOOD KDC-3010

[. . . ] · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. [. . . ] Each time the button is pressed Random Play English | 25 CD/MP3/WMA/External disc control features Function of the KDC-3010 Function of MP3/WMA Disc Naming (DNPS) Attaching a title to a CD. Folder Select Quickly selecting the folder you want to listen to. 1 Play the disc you want to attach a name to · A title can't be attached to an MD. · Refer to the 'Text Display Switching' (page 15) and select the "DNPS" display. No name can be attached to the source if "DNPS" cannot be selected for it. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "FSEL" is displayed above the [5] button. Refer to 'Notes on Multi-function Key System' (page 9). 2 Enter name set mode Press the [NAME. S] button for at least 2 seconds. "NAME SET" is displayed. 2 Enter Folder Select mode Press the [5] ("FSEL") button. During Select mode the folder information is displayed as shown below. Folder name display Displays the current folder name. 3 Move the cursor to the enter character position Press the [4] or [¢] button. 4 Select the character type Press the [2] -- [4] button. Each time the button is pressed the character type switches as shown below. 3 Select the folder level Press the [FM] or [AM] button. With the [FM] button you move 1 level down and with the [AM] button 1 level up. Selecting a folder in the same level Press the [4] or [¢] button. Refer to 'Notes on Multi-function Key System' (page 9). 2 Enter Hands Free mode Press the [2] ("H-F") button. 3 Select the SMS Mode Press the [5] ("SMS") button. "SMS Mode" is displayed. 2 Synchronize the data Press the [3] ("SYNC") button. The "SYNC" display turns off when data synchronization starts. 4 Select the Message Press the [FM] or [AM] button. 5 Switch the Display Press the [4] or [¢] button. Each time the button is pressed the mode switches as follows: SMS Mode item Name/ Phone Number Date Message When the display line of a message is 'Text Scroll' (page 36) set to "Manual", scrolling is possible with [4]/[¢], and when the setting is set to "Auto", scrolling is automatic. Switching between the Name and Telephone Number Press the [TI] button. Scrolling the Name and Telephone Number display Press the [SCRL] button. 6 Exit Hands Free mode Press the [6] button. · When New Message is Received, "New MSG" is displayed. 30 | English Menu system SRC TI MENU AM FM 4 ¢ RDS indicator Menu System Setting during operation beep sound etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 4 Exit Menu mode Press the [MENU] button. · When other items that are applicable to the basic operation method above are displayed afterwards their setting content chart is entered. (Normally the uppermost setting in the chart is the original setting. ) Also, the explanation for items that aren't applicable ('Manual Clock Adjustment' etc. ) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Press the [FM] or [AM] button. Example: When you want to set the beep sound select the "Beep" display. 3 Set the menu item Press the [4] or [¢] button. Example: When "Beep" is selected, each time the button is pressed it switches "Beep ON" or "Beep OFF". [. . . ] If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. There's already another disc inserted. Press the [0] button and remove the disc. ? ? ? If the following situations, consult your nearest service center: Even though the disc changer is connected, the Disc Changer source is not ON, with "AUX EXT" showing in the display during the Changer Mode. ? ? ? 44 | English The messages shown below display your systems condition. EJECT: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. [. . . ]