User manual KENWOOD KDC-4020

[. . . ] Setting the "O-N" Switch to the "N" position for the applicable KENWOOD disc changers/ CD players. The functions that can be used and the information that can be displayed will differ depending on the models being connected. · You can damage both your unit and the CD changer if you connect them incorrectly. Attach the panel while you are on the vehicle The panel lock arm will be appeared when the panel is removed. Therefore, the panel must be attached during the driving. 2CAUTION To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. · Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. [. . . ] The reference for the Menu items and their setting content is after this operation explanation. 4 Exit Menu mode Press the [MENU] button. · When other items that are applicable to the basic operation method above are displayed, afterwards their setting content chart is entered. (Normally the uppermost setting in the chart is the original setting. ) Also, the explanation for items that aren't applicable (<Manual Clock Adjustment> etc. ) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob to [FM] or [AM]. Example: When you want to set the beep sound select the "BEEP" display. 3 Set the menu item Push the Control knob to [4] or [¢]. Example: When "BEEP" is selected, each time the knob is pushed it switches "BEEP ON" or "BEEP OFF". You can continue by returning to step 2 and setting other items. English | 21 Menu system Function of the KDC-4020 In Standby mode "APPROVED" is displayed. The unit can be used. · If an incorrect code is input, "WAITING" is displayed, and the input prohibited time shown below is generated. After the input prohibited time lapses, "CODE" is displayed, and input can be done. Security Code Because authorization by the Security Code is required when it's removed from the vehicle, personalizing this unit is by using the Security Code is a help in preventing theft. · When the Security Code function is activated, it can't be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. Number of times the incorrect code was input 1 2 3 4 Input prohibited time -- 5 minutes 1 hour 24 hours 2 Enter Menu mode Press the [MENU] button for at least 1 second. The illumination color is green. Only stations whose reception is good are searched for in auto seek tuning. Display "LO. S OFF" "LO. S ON" Setting The local seek function is OFF. The local seek function is ON. . . . English | 23 Menu system Function of the KDC-4020 In Tuner mode Tuning Mode Sets the tuning mode. Tuning mode Auto seek Preset station seek Manual Display "AUTO 1" "AUTO 2" "MANUAL" Operation Automatic search for a station. Search in order of the stations in the Preset memory. Normal manual tuning control. · Without restricting AF function to the specified region and network, it sets up to search the station with good reception in the same RDS network. Function of the KDC-4020 Auto TP Seek When the TI function is ON and poor reception conditions are experienced when listening to a traffic information station, another traffic information station with better reception will be searched for automatically. Display "ATPS ON" "ATPS OFF" Setting The Auto TP Seek Function is ON. The Auto TP Seek Function is OFF. Function of the KDC-4020 AF (Alternative Frequency) When poor reception is experienced, automatically switch to another frequency broadcasting the same program in the same RDS network with better reception. Display "AF ON" "AF OFF" Setting The AF function is ON. The AF function is OFF. When the AF function is ON, the "RDS" indicator is ON. · When no other stations with stronger reception are available for the same program in the RDS network, you may hear the incoming broadcast in bits and snatches. Turn OFF the AF function in such a case. In FM reception Monaural Reception Noise can be reduced when stereo broadcasts are received as monaural. [. . . ] The sound skips when an Audio file is being played. Clean the media, referring to the CD cleaning of the section on <About CDs> (page 5). Record the media again or use another media. The Audio file track time isn't displayed correctly. [. . . ]