User manual KENWOOD KDC-5018

[. . . ] For safety's sake, leave the mounting and wiring work to professionals. Do Not Load 8 cm (3 in. ) CDs in the CD slot If you try to load a 8 cm (3 in. ) CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. About CD players/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. [. . . ] · You can change the name of a CD by the same operation you used to name it. / · A title cannot be attached to MD or Audio file media. 2 Enter Menu mode Using the Control knob, select "MENU". For the operation method, refer to <Function Control mode> (page 10). "MENU" is displayed. 3 Select Name set mode Push the Control knob towards up or down. Select the "Name Set" display. 4 Enter Name set mode Press the Control knob for at least 1 second. 5 Move the cursor to the enter character position Push the Control knob towards right or left. 6 Select the character type Press the Control knob. Each time you press the knob, the character type alternates between the types shown in the table below. Character type Alphabet upper case Alphabet lower case Numbers and symbols Special characters (Accent characters) 7 Select the characters Turn the Control knob or push it towards up or down. / · You can enter characters by using a remote control with a number button. Example: If you enter "DANCE". Character "D" "A" "N" "C" "E" Button [3] [2] [6] [2] [3] Times pressed 1 1 2 3 2 8 Repeat steps 5 through 7 and enter the name. 24 | English Function of Audio file Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob toward up for at least 2 seconds. File Select Selecting the music you want to listen to from the device or media being played now. 1 Enter File Select mode Turn the Control knob. / · When the <Display Illumination Control> (page 29) is set to OFF, the display may black out while scrolling. 2 Search for music Select the category item using the Control knob. Operation system for iPod Operation type Movement between items Selection of item Return to previous item Return to first item Operation Turn the Control knob. Push the Control knob towards up for at least 1 second. Operation system for other than iPod Operation type Operation Movement between items Turn the Control knob. Selection of item*1 Push the Control knob towards right. Selection of item*2 Press the Control knob. "Security Set" is displayed. Number of times the incorrect code was input 1 2 3 4 Input prohibited time -- 5 minutes 1 hour 24 hours 3 Enter Security Code mode Press the Control knob for at least 1 second. When "Enter" is displayed, "SECURITY SET" is also displayed. In Standby mode Source Select Mode Setting up the Source Select mode. Display "SRC Select : 1" "SRC Select : 2" Setting Displays source icons for your choice. Allows you to select sources one after another. 4 Select the digits to enter Push the Control knob towards right or left. 5 Select the Security Code numbers Turn the Control knob or push it towards up or down. 6 Repeat steps 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "Re-Enter" is displayed, "SECURITY SET" is also displayed. 8 Do the step 4 through 7 step operation, and reenter the security code. The Security Code function activates. / · If you enter a Code different from your Security Code, you have to start over from step 4. English | 27 Menu system Function of KDC-W7537U/KDC-W7537UY In USB mode with iPod connected In Standby mode iPod mode setting Setting up the iPod operation method in File Select. Display "iPod Mode : ON" "iPod Mode : OFF" Setting Uses the operation method similar to that of iPod. Uses the operation method different from that of iPod. Date Mode Setting the date format. 1 Select Date Mode Turn the Control knob. Select the "Date Mode" display. 2 Enter Date mode Press the Control knob for at least 1 second. 3 Select the date format In Standby mode Turn the Control knob or push it towards up or down. Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "Beep : ON" "Beep : OFF" Setting Beep is heard. Beep canceled. 4 Exit Date mode Press the [FNC] button. In Standby mode Date Adjustment 1 Select Date Adjust mode Turn the Control knob. [. . . ] If the "Mecha Error" code does not disappear, consult your nearest service center. No Name: Load: Waiting: Reading: IN (Blink): Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. [. . . ]