User manual KENWOOD KDC-5026G

[. . . ] Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. [. . . ] Selecting a music will play it from the beginning. 5 Play the selected music Press the Control knob. Canceling File Select Press the [F. SEL] button. Scrolling the file/folder name display Push the Control knob toward up for at least 2 seconds. Canceling File Select 1 Press the [F. SEL] button twice. Function of non-iPod File Select 1 mode Select the target folder by tracing the hierarchical levels of folders. This is convenient when managing audio files by folder. 1 Enter Folder Select 1 mode Press the [F. SEL] button. Folder name display Displays the current folder name. English | 21 CD/USB device/Audio file/External disc control features Function of non-iPod Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob toward up for at least 2 seconds. File Select 2 mode Select the target folder within the folders containing audio files. The folder which contains playable audio files is only displayed. 1 Enter Folder Select 2 mode Press the [F. SEL] button twice. Folder name display Displays the current folder name. / · When the <Display Illumination Control> (page 25) is set to OFF, the display may black out while scrolling. 2 Select the folder Push the Control knob towards right or left. Each time you push the knob, the folders containing audio files are displayed one after another. Check the name of upper level folder Push the Control knob towards up. Each time you push the knob towards up, the folder just above the current folder is displayed. Each time you push the knob towards down, the folder just below the current folder is displayed. " " is displayed while the upper level folder is displayed. 3 Determine the folder Press the Control knob. Beep canceled. 5 Select the Security Code numbers Push the Control knob towards up or down. 6 Repeat step 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed. 8 Do the step 4 through 7 step operation, and reenter the security code. The Security Code function activates. In Standby mode Manual Clock Adjustment / · If you enter a Code different from your Security Code, you have to start over from step 4. / · You can do this adjustment when the <Synchronize Clock> (page 25) is set as OFF. 1 Select Clock Adjustment mode Push the Control knob towards up or down. Select the "CLK ADJ" display. 9 Exit Security Code mode Press the [MENU] button 24 | English 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. Display Illumination Control This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night. Display "DISP ON" "DISP OFF" Setting Keeps the display on. Turns off the display when you perform no operation for 5 seconds. 3 Adjust the hours Push the Control knob towards up or down. Adjust the minutes Push the Control knob towards right or left. 4 Exit Clock adjustment mode Press the [MENU] button. / · Set the Display Illumination Control when the <Demonstration mode Setting> (page 29) is set to OFF. · When the display is off, pressing any key will turn on the display. · When the display is off, you cannot perform any operation except for the following: · Volume · Attenuator · Selecting the source · Ejecting the disc · Turning off the power · During function control, such as the Menu System, the display stays on. In Standby mode Synchronize Clock Synchronizing the RDS station time data and this unit's clock. [. . . ] And then press the reset button on the unit. If the "E-99" code does not disappear, consult your nearest service center. Discs are being exchanged in the Disc changer. The unit is reading the data on the disc. [. . . ]