User manual KENWOOD KDC-6051U

[. . . ] 16 About the Quick Start Guide This Quick Start Guide explains the basic functions of this unit. For functions not covered in this Guide, refer to the Instruction Manual (PDF file) contained in the included CD-ROM “Instruction Manual”. To refer to the Instruction Manual contained in the CD-ROM, a PC loaded with Microsoft® Windows XP/Vista/7 or Mac OS X® 10. The Instruction Manual is subject to change for modification of specifications and so forth. [. . . ] KDC-6051U Calling a number in the Phone Book Dial the phone number in the phone book of your cell phone. If the phone book has not been downloaded to this unit, operate the cellphone to download it. 1 By operating the cell-phone, register the hands-free unit (pairing). select “KENWOOD BT CD/R-4P1” , “KCA-BT300” or “KCA-BT200” from the list of connected units. Enter the PIN code of this unit from the cellphone. The PIN code of this unit is “0000” by default. When registration of your cellphone is complete, the phone book of the cellphone is automatically downloaded to this unit. (If the phone book has not been downloaded to this unit, operate the cellphone to download it. Press the [ KDC-6051U Press the [TI] button for at least 1 second. Turn the [VOL] knob to select “Phonebook”, and then press the [VOL] knob. Turn the [VOL] knob to select initial of name, and then press the [VOL] knob. Turn the [VOL] knob to select phone number. To prevent short circuits, remove the key from the ignition and disconnect the terminal of the battery. Make the proper input and output wire connections for each unit. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. Take Connector A on the wiring harness and connect it to the external power connector on your vehicle. Connect the wiring harness connector to the unit. Reconnect the - terminal of the battery. ¤ CAUTION Install this unit in the console of your vehicle. Do not touch the metal part of this unit during and shortly after the use of the unit. Metal part such as the heat sink and enclosure become hot. For safety’s sake, leave the mounting and wiring work to professionals. [. . . ] € Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. • “Adobe Reader” is a trademark of Adobe Systems Incorporated. The marking of products using lasers CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. [. . . ]