User manual KENWOOD KDC-610U

[. . . ] KDC-610U CD-RECEIVER Quick Start Guide AMPLI-TUNER LECTEUR DE CD Guide de démarrage rapide Guía de inicio rápido REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-Receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. [. . . ] When it is connected, the source is switched automatically and playback starts. You can connect the iPod or USB device to either one of the USB terminals provided at the front and rear of this unit. If you connect it to the rear USB terminal, the “REAR USB” indicator stays lit. [1] Selecting an audio file folder Selecting a song (track or file) Press [E] or [F]. Playing a USB device/ iPod Fast-forwarding or fastbackwarding a song (track or file) Press and hold [E] or [F]. Pause and play a song (track or file) Press and hold [1/6]. O  ptional accessories When connecting devices featuring the Lightning connector, KCP-iP102 (optional accessory) and Apple Lightning to 30-pin Adapter are necessary. Do not keep Apple Lightning to 30-pin Adapter in your car to avoid the damage by heat. € Playable USB devices USB mass storage class • Playable USB device file systems FAT12, FAT16, FAT32 The online manual about audio files is put on the site, www. Music search You can search for the song you want to play. Models of iPods/iPhones that can be connected to this unit Ejecting disc Open the Disc slot cover upward, and press [G]. Switch to a source other than USB, iPod, Pandora, and iHeartRadio, and then remove the USB device. Data contained in the USB device/ iPod may be damaged if you remove it when it is used as the active source. Removing USB device/ iPod Made for • iPod touch (5th generation) • iPod touch (4th generation) • iPod touch (3rd generation) • iPod touch (2nd generation) • iPod touch (1st generation) • iPod classic • iPod with video • iPod nano (7th generation) • iPod nano (6th generation) • iPod nano (5th generation) • iPod nano (4th generation) • iPod nano (3rd generation) • iPod nano (2nd generation) • iPod nano (1st generation) • iPhone 5 • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone For information on the compatibility with iPod/iPhone software, visit www. English | 9 Before installation # WARNING • The unit can only be installed in a car with a 12V DC power supply, negative ground. € If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. CAUTION • Install this unit in the console of your vehicle. € Do not touch the metal parts of this unit during and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot. • Mounting and wiring this product requires skills and experience. For safety’s sake, leave the mounting and wiring work to professionals. [. . . ] (If you are not already a registered user, an account can also be created at www. s , Canada , Australia and New Zealand. € Because Pandora is a third-party service, the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable. [. . . ]