User manual KENWOOD KDC-82

[. . . ] · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] Press once to fast forward to the next track, twice to fast forward to the track after that, and so forth. Play starts at the beginning of the displayed track number. NOTE (For disc changers : KDC-4080R/KDC-4080RV only) You cannot make a forward track search when listening to the last track on a disc. NOTE "LOAD" is displayed when discs are being exchanged on the disc changer. Track / Disc Repeat Repeat playing the current track or disc. Turning Repeat Play Function On/Off: Press the REP button to switch the repeat play function on and off as follows : w Track Repeat ON w Disc Repeat ON (Function of disc changers : KDC-4080R/KDC-4080RV only) w Track/Disc Repeat OFF "REP ON/TREP ON" is displayed and the track number blinks in the display when track repeat is on. "DREP ON" is displayed and the disc number blinks in the display when disc repeat is on. NOTE Function of the KDC-4080R/KDC-4080RV (Function of disc changers) Search forwards or backwards through the discs in a disc changer until you reach the one that you want to listen to. Disc Search Repeat play is cancelled when you eject the disc. Making a Reverse Disc Search: Press the DISC­ button to display the desired disc number. Each time the button is pressed, the displayed disc number decreases by one. Play starts at the beginning of the displayed disc. Making a Forward Disc Search: Press the DISC+ button to display the desired disc number. Each time the button is pressed, the displayed disc number Track Scan Successively play the beginning of each track on a disc until you find the track that you want to listen to. Starting the Track Scan: -- 16 -- Press the SCAN button. "SCAN ON/TSCN ON" is displayed and the first 10 seconds of each track are played, and the tracks are played in order. The track number currently being heard blinks in the display. Stopping to Listen to the Track Being Scanned: Press the SCAN button again to stop the scan and keep on listening to a track normally. NOTE Random Play Play all the tracks on the current disc in random order. 1 Press the RDM button to switch the random play function on and off. Please see your disc changer manual for details. · Discs are identified by their total length and number of tracks. If you play another CD that happens to have exactly the same specifications as another CD whose name is stored, the wrong name will be displayed for it. · If you want to change the name of a disc, repeat steps 1 and 2 to display the name, and then repeat steps 3 and 4 to enter the changes. · Pressing the reset button erases the disc nemes stored in this unit, but does not erase the names stored in a disc changer. 4 Press the DISC+ or DISC­ button to display the desired character. Characters that can be displayed are as follows. Alphabet (upper case) : A ~ Z Numerals and symbols : 0~9 @ " ` ` % & * + - = , . / \ < > [ ] NOTE The operation and characters that can be entered may change as listed below, depending on the unit that is connected. Press the DISC+ or DISC­ button to display the desired character. Besides the alphabet (capital letters only) and numbers, you can choose the following characters: /, +, ­, *, =, <, >, [ and ]. 5 Continue steps 3 and 4 until all the characters are chosen for the name. NOTE You can enter up to 8 characters for each name. 6 Press either the NAME. S button on the main unit or the OK button on the remote control. The disc name is stored and the disc name preset mode is cancelled. [. . . ] Turn off the random play function. English A CD ejects as soon as it is loaded. External disc control mode (KDC-4080R/4080RV only) PROBLEM The disc control mode cannot be selected. The specified disc does not play, but another one plays instead. POSSIBLE CAUSE No cable has been connected to the disc changer input terminal on the unit. The disc is loaded in a different slot from that specified. The disc is severely scratched. SOLUTION Connect the cable to the disc changer input terminal on the unit. [. . . ]