User manual KENWOOD KDC-95R

[. . . ] In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. KENWOOD CORPORATION 2967-3, ISHIKAWA-CHO, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0. 21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Release it when the song you want to listen to is played Press the [SCAN] button. -- 19 -- 2 CD/MP3/External disc control features English Album Select (Function of MP3) Quickly selecting the folder you want to listen to. Text/Title Scroll Scrolling the displayed CD text, MP3 text, or MD title. Press the [DISP] button for at least 1 second. 1 Enter Album Select mode Press the [#5] button. During Select mode the folder information is displayed as shown below. DNPP (Disc Name Preset Play) (Function of disc changers with remote) Selecting the CD displayed in the DNPS of the CDs set in the Disc changer. <Folder name display> Displays the current folder name. 1 2 Select the folder level Press the [FM] or [AM] button. With the [FM] button you move 1 level down and with the [AM] button 1 level up. Selecting a folder in the same level Press the [4] or [¢] button. With the [4] button you move to the previous folder, and with the [¢] button to the next folder. Returning to the top level Press the [#3] button. Enter DNPP mode Press the [DNPP] button on the remote. When "DNPP" is displayed the DNPS display in order. Forward / Reverse display Press the [DISC­] or [DISC+] button. 2 When the disc you want is displayed Press the [OK] button on the remote. The disc being displayed is played. Canceling the DNPP mode Press the [DNPP] button on the remote. 3 Decide the folder to play Press the [38] button. Confirm the Security Code Press the [¢] button for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is displayed. Do the step 4 through 7 operation, and reenter the Security Code. The Security Code function activates. When the wrong Code is entered in steps 4 through 6, repeat from step 4. Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "Beep ON"/ "BEEP ON" "Beep OFF"/ "BEEP OFF" Setting Beep is heard. Beep canceled. 2 3 4 5 6 7 8 Manual Clock Adjustment 1 Select Clock Adjustment mode Press the [FM] or [AM] button. Enter Clock Adjust mode Press the [4] or [¢] button for at least 1 second. Adjust the hours Press the [FM] or [AM] button. Adjust the minutes Press the [4] or [¢] button. 2 3 4 -- 22 -- Exit Clock adjustment mode Press the [MENU] button. DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "DSI ON" "DSI OFF" Setting LED flashes. LED OFF. Function of the KDC-MPV7019/KDC-95R/KDC-X459/KDC-419 Switching Display Type Setting the Display type. [. . . ] The unit checks all tracks on the loaded medium first. If the medium has many tracks recorded, it may take a long time for the unit before it starts playing MP3. Fails to play MP3 in the intended order. 72 The MP3 tracks were not written by the CD writer in the order in which you wanted them to be played. Depending on the CD writer, you may be able to set the order in which MP3 tracks are to be played by writing them onto a medium with their track names beginning with play sequence numbers such as "01" to "99". [. . . ]