User manual KENWOOD KDC-BT34U

[. . . ] Indd 1 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 27/12/2013 2:02:43 PM For Israel Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. [. . . ] The connected phone (which has been paired the earliest) is activated. However, if priority device is connected, pressing and holding activate the priority device. ( 12, DVC PRIORITY) 2 Speak the name of the contact you want to call or the voice command to control the phone functions. • Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details. € This unit also supports the intelligent personal assistant function of iPhone. nUMBER DIAL VOICE 10 EN_KDC_BT34U_EN_f. Indd 10 25/11/2013 2:56:20 PM Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) BLUETOOTH® BATT* SIGNAL* SETTINGS AUTO ANSWER RING MODE LOW/ MID/ FULL: Shows the strength of the battery. NO SIGNAL/ LOW/ MID/ MAX: Shows the strength of the current received signal. Default: XX 1 — 30: The unit answer incoming call automatically in the selected time. SYSTEM: The unit rings to notify you when a call/text message comes in. (Default ring tone is different according to the paired device. ) • CALL: Selects your preferred ring tone (TONE 1 — 5) for incoming calls. € MESSAGE: Selects your preferred ring tone (TONE 1 — 5) for incoming text messages. PHONE: The unit uses the connected phones’ ring tone to notify you when a call/text message comes in. (The connected phone will ring if it does not support this feature. ) ON: The unit rings and “SMS RECEIVED” appears to notify you of an incoming text message. 5 Turn the volume knob to select a name, then press the knob. 6 Turn the volume knob to select a phone number, then press the knob to call. To return to the previous hierarchy, press . 2 Turn the volume knob to select [CALL HISTORY], [PHONE BOOK], or [NUMBER DIAL], then press the knob. 3 Turn the volume knob to select a contact or enter a phone number. [. . . ] Do not touch the metal parts of this unit during and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot. € Do not connect the [ wires of speakers to the car chassis or Ground wire (black), or connect them in parallel. € Mount the unit at an angle of less than 30º. [. . . ]