User manual KENWOOD KDC-BT73DAB

[. . . ] 19 Before use # WARNING To prevent injuries or a fire, take the following precautions: • Stop the car before operating the unit. € To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. €CAUTION • Adjust the volume so that you can hear sound outside the car. Driving with the volume adjusted to a too high level may cause an accident. [. . . ] If your car’s ignition key switch does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wires to a constant-voltage power source, as with battery wires, the battery may die. • Mounting and wiring this product requires skills and experience. After the installing the unit, check whether the brake lamps, blinkers, wipers, etc. Mount the unit so that the mounting angle is 30° or less. Reception may become poor if there are metal objects near the Bluetooth antenna. (KDC-BT73DAB, KDC-BT53U only) • • • • • • Bluetooth antenna unit  KDC-BT73DAB  • This unit has the cooling fan to decrease the internal temperature. Do not mount the unit in a place where the cooling fan of the unit are blocked. Blocking these openings will inhibit the cooling of the internal temperature and result in malfunction. cooling fan B59-2186-00_00_13Stepup_QSG_E_En. Indd 10 12/12/17 15:0 For Good Reception Connecting the ISO Connector To assure good reception, note the following: • Communicate with the cell phone within the line-of-sight distance of 10 m (30 ft). The communication range becomes shorter depending on the surrounding environment. The communication range also becomes shorter when there is an obstacle between this unit and the cell phone. The above maximum communication range (10 m) is not always assured. € A broadcast station or walkie-talkie located nearby can interfere with communication due to a too strong signal. The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2, make the connection as illustrated. Please be sure to reconnect the cable as shown 2 below to install this unit to the Volkswagen vehicles etc. 1 When the A-7 pin (red) is connected with the ignition, and the A-4 pin (yellow) is connected to the constant power supply of the vehicle’s ISO connector (default): Ignition cable (Red) A-7 Pin (Red) Installation accessories 1 . 1 [2] 2 When the A-7 pin (red) is connected to the constant power supply, and the A-4 pin (yellow) is connected with the ignition of the vehicle’s ISO connector: Ignition cable (Red) A-7 Pin (Red) Unit Battery cable (Yellow) Vehicle A-4 Pin (Yellow) 4[1] . [. . . ] € Some Aha™ functionality cannot be operated from this unit. La mention « Paring Press the volume knob » apparaît. Требования Aha™: Made for • iPod touch (4th generation) • iPod touch (3rd generation) • iPod touch (2nd generation) • iPod touch (1st generation) • iPod classic • iPod with video • iPod nano (6th generation) • iPod nano (5th generation) • iPod nano (4th generation) • iPod nano (3rd generation) • iPod nano (2nd generation) • iPod nano (1st generation) • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone Информацию, касающуюся совместимости программного обеспечения устройств iPod и iPhone, можно найти на веб-сайте www. Indb 145 2012/12/17 15:1 Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) P  roducts and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. [. . . ]