User manual KENWOOD KDC-BT945U

[. . . ] Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. [. . . ] Selecting a music will play it from the beginning. Cancelling File Select Press the [F. SEL] button. Scrolling the file/folder name display Push the Control knob toward up for at least 2 seconds. Cancelling File Select 1 Press the [F. SEL] button twice. 20 | English Function of non-iPod and non-"Music Editor" file Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob toward up for at least 2 seconds. File Select 2 mode Select the target folder within the folders containing audio files. The folder which contains playable audio files is only displayed. 1 Enter Folder Select 2 mode Press the [F. SEL] button twice. Folder name display Displays the current folder name. / · When the <Display Illumination Control> (page 24) is set to OFF, the display may black out while scrolling. 2 Select the folder Push the Control knob towards right or left. Each time you push the knob, the folders containing audio files are displayed one after another. Check the name of upper level folder Push the Control knob towards up. Each time you push the knob towards up, the folder just above the current folder is displayed. Each time you push the knob towards down, the folder just below the current folder is displayed. " " is displayed while the upper level folder is displayed. 3 Determine the folder Press the Control knob. The music in the determined folder are displayed. 4 Select the music you want to listen to Operation type Operation Movement between music Push the Control knob towards right or left. Return to folder selection Press the Control knob for at least 1 second. Display "KEY RED" "KEY GRN" Setting The illumination color is red. The illumination color is green. Manual Clock Adjustment / · You can do this adjustment when the <Synchronize Clock> (page 24) is set as OFF. 1 Select Clock Adjustment mode Push the Control knob towards up or down. Select the "CLK ADJ" display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. Display Illumination Control This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night. Display "DISP ON" "DISP OFF" Setting Keeps the display on. Turns off the display when you perform no operation for 5 seconds. 3 Adjust the hours Push the Control knob towards up or down. Adjust the minutes Push the Control knob towards right or left. 4 Exit Clock adjustment mode Press the [MENU] button. / In Standby mode Synchronize Clock Synchronizing the RDS station time data and this unit's clock. Display "SYNC ON" "SYNC OFF" Setting Synchronizes the time. Adjust the time manually. / · It takes 3 to 4 minutes to synchronize the clock. · Set the Display Illumination Control when the <Demonstration mode Setting> (page 29) is set to OFF. · When the display is off, pressing any key will turn on the display. [. . . ] And then press the reset button on the unit. If the "E-99" code does not disappear, consult your nearest service center. Discs are being exchanged in the Disc changer. The unit is reading the data on the disc. [. . . ]