User manual KENWOOD KDC-C471FM

[. . . ] Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new compact disc auto changer. Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product. [. . . ] You can display various kinds of text data transmitted from broadcasting stations by switching as follows. Enter the channel number Press the number buttons. If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. If you cannot receive any signal in the input Channel due to a bad condition on radio wave or another problem, "ACQUIRING SIGNAL" appears. The FM modulator is turned OFF and the radio can be heard. If you press the switch once more, the disc is replayed from the paused part. Release your finger to play the disc at that point. Release your finger to play the disc at that point. Replaying the song, disc in the Disc changer you're listening to. Doing Track Search by entering the track number. Enter the track number Press the number buttons on the remote. Playing the first part of each song on the disc you are listening to and searching for the song you want to listen to. Release it when the song you want to listen to is played Press the [SCAN] button. Enter the disc number Press the number buttons on the remote. Each time the button is pressed Random Play turns ON or OFF. When it's ON, the "RDM" indicator is ON and the track number blinks. When the [¢] button is pressed, the next song select starts. Each time the button is pressed the Magazine Random Play turns ON or OFF. When it's ON, the "RDM" indicator is ON and the track and disc number blink. When the [¢] button is pressed, the next song select starts. This unit does not display the information of Disc title and Track title. The reference for the Menu items and their setting content is after this operation explanation. [. . . ] If the "Mecha Error" code does not disappear, consult your nearest service center. The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. E0d Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. [. . . ]