User manual KENWOOD KDC-C511

[. . . ] Frequency Offset CRSC (Clean Reception System Circuit) Text Scroll Built-in Auxiliary input Setting CD Read Setting AMP Control Receive mode Setting Basic Operations of remote 18 Accessories/ Installation Procedure Connecting Wires to Terminals Installation Removing the Unit Troubleshooting Guide 20 Specifications 30 32 33 34 36 37 40 Tuner features Tuning Mode Tuning Direct Access Tuning Station Preset Memory Auto Memory Entry Preset Tuning CD/MP3/WMA/ External disc control features Playing CD & MP3/WMA Playing External Disc Fast Forwarding and Reversing Track/File Search Disc Search/Folder Search Direct Track/File Search Direct Disc Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play Folder Select Text/Title Scroll DNPP (Disc Name Preset Play) 2| English 2Warning 2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. KENWOOD CORPORATION 2967-3, ISHIKAWA-CHO, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0. 21 CFR 1040. [. . . ] Forward / Reverse display Press the [DISC­] or [DISC+] button. 2 When the disc you want is displayed Press the [OK] button on the remote. The disc being displayed is played. Canceling the DNPP mode Press the [DNPP] button on the remote. English | 23 HD Radio control features SRC 4 FM ¢ AM Tuning Selecting the station. · The HD Radio cannot be selected as a dual zone source. 1 Select HD Radio source Press the [SRC] button. Select the "HD RADIO" display. 2 Select the HF band Press the [FM] button. Each time the [FM] button is pressed it switches between the HF1, HF2, and HF3 bands. Select the HA band Press the [AM] button. 3 Tune up or down band Press the [4] or [¢] button. · When you connect an HD Radio, Tuner features of the unit are disabled and switched to HD Radio tuner features. A portion of the setting methods including the Tuning Mode will change. · With the HD Radio tuner, you can use the similar functions to 'Station Preset Memory', 'Auto Memory Entry', and 'Preset Tuning' of Tuner features. Refer to Tuner features for how to use the functions. 24 | English Menu system SRC 4 FM ¢ MENU AM Menu display Menu System Setting during operation beep sound etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 4 Exit Menu mode Press the [MENU] button. · When other items that are applicable to the basic operation method above are displayed afterwards their setting content chart is entered. (Normally the uppermost setting in the chart is the original setting. ) Also, the explanation for items that aren't applicable ('Manual Clock Adjustment' etc. ) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. Turning ON this control enhances the preout quality. Display "AMP Mute OFF" "AMP Mute ON" Setting The built-in amplifier activates. The built-in amplifier deactivates. Dimmer Dimming this unit's display automatically when the vehicle light switch is turned ON. Display "Dimmer ON" "Dimmer OFF" Setting The display dims. The display doesn't dim. Function of the KDC-X679/KDC-C511 In SIRIUS Tuner, External disc, or Auxiliary input source Dual Zone System Makes the sound different for the front channel and rear channel. Display "Zone 2 OFF" "Zone 2 ON" Setting The front and rear are the same source sound. The front and rear are the different source sound. Function of the KDC-X679 System Q Setting Setting whether the display indicates the System Q factors (Bass center frequency, Bass Q factor, Bass extend, Middle center frequency, Middle Q factor, and Treble center frequency) in Audio control. Display "System Q ON" "System Q OFF" Setting The System Q factors are displayed. The System Q factors aren't displayed. · When the Dual Zone System is on, there is only sound effect including Audio control for internal source. · When you set the Dual zone system to ON while the subwoofer preout is switched ON, the sound of the subwoofer preout isn't output. · When the source is selected to VZ-7000P/N (optional accessory), the VZ-7000P/N's sound is not output if the Dual Zone System is turned ON. Function of the KDC-MP625/KDC-C511 In Standby mode Function of the KDC-X679/KDC-C511 When the Dual Zone System is OFF Dual Zone System Setting Setting the Front channel and Rear channel sound in the Dual Zone System. [. . . ] The disc magazine is not completely loaded. No disc has been loaded in the disc magazine. No disc has been loaded in the disc magazine. Nothing has been recorded on the MD. Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. [. . . ]