User manual KENWOOD KDC-C803

[. . . ] In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. KENWOOD CORPORATION 2967-3, ISHIKAWA-CHO, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0. 21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] 1 Press the M. RDM button to switch magazine random play on and off. "M. Random ON" is displayed when magazine random play is turned on. The disc and track numbers will change over and over in the display as the next track is being selected. When the disc/track has been selected, play will begin. The selected disc/track number blinks in the display as it is being played. · The track scan function is canceled when you eject the disc. · The track scan function only scans each track on a disc once. 2 To change the track being heard, press the ¢ button. Another disc/track will be selected and played. Random Play Play all the tracks on the current disc in random order. NOTE 1 Press the RDM button to switch random play on and off. "Random ON" is displayed when random play is turned on. The track number will change over and over in the display as the next track is being selected. When the track has been selected, play will begin. The selected track number blinks in the display as it is being played. NOTE (For disc changers) When all the tracks on a certain disc have been played using random play, the next disc on the changer will start playing using the same function. · Magazine random play is canceled when you eject the disc. · The time needed for random selection depends on the number of discs loaded in the disc magazine. 2 To change the track being heard, press the ¢ button. Another track will be selected and played. -- 21 -- CD/External disc control features English Text / Title Scroll This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu. Push back the bottom of the faceplate with your hand until it locks. The IN indicator will light when a media has been inserted. 2CAUTION Doing so will cause breakdown. NOTE When inserting a media, make sure the media has been completely drawn in before pushing back the faceplate. Failing to do so might scratch the media. Playing Media Already Inserted: Press the SRC button repeatedly to select the CD mode. "CD" is displayed when the CD mode has been selected. Pausing and Restarting Media Play: Press the 38 button to make the media pause. Press the same button again to start play again. NOTE · When you load a media and eject it right away, the next time you try to insert the media may not load. In such a situation, take the media out for a moment and then reinsert it. · The MP3 media that this unit can play are CD-ROM, CD-R, and CD-RW. The medium formats must be ISO 9660 Level 1 or Level 2. The methods and precautions to be followed for writing MP3 files are covered in "Notes on playing MP3 files" (page 8). [. . . ] Cannot play CD-R or CD-RW The computer chip in the unit is not functioning normally. Random play or magazine random play has been selected. The setting is not cancelled. Turn off random play or magazine random play. The settings for these functions remain on until the setting to off or the disc ejected, even if the power is turned off or the source changed. Finalization processing is not being conducted for CDR/CD-RW. A non-compatible CD changer is being used to play the CD-R/CD-RW. Conduct finalization processing with CD recorder. [. . . ]