User manual KENWOOD KDC-MP333

[. . . ] · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. [. . . ] The reference for the Menu items and their setting content is after this operation explanation. 4 Exit Menu mode Press the [MENU] button. · When other items that are applicable to the basic operation method above are displayed afterwards their setting content chart is entered. (Normally the uppermost setting in the chart is the original setting. ) Also, the explanation for items that aren't applicable ('Manual Clock Adjustment' etc. ) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "Menu" is displayed. 2 Select the menu item Press the [FM] or [AM] button. Example: When you want to set the beep sound select the "Beep" display. 3 Set the menu item Press the [4] or [¢] button. Example: When "Beep" is selected, each time the button is pressed it switches "Beep ON" or "Beep OFF". You can continue by returning to step 2 and setting other items. English | 25 Menu system In Standby mode Security Code Because authorization by the Security Code is required when it's removed from the vehicle, personalizing this unit is by using the Security Code is a help in preventing theft. · If an incorrect code is input, "Waiting" is displayed, and the input prohibited time shown below is generated. After the input prohibited time lapses, "CODE" is displayed, and input can be done. · When the Security Code function is activated it can't be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package. Number of times the incorrect code was input 1 2 3 4 Input prohibited time -- 5 minutes 1 hour 24 hours 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "Menu" is displayed, "Security" is displayed. Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. The built-in amplifier deactivates. Dimmer Dimming this unit's display automatically when the vehicle light switch is turned ON. Display "Dimmer ON" "Dimmer OFF" Setting The display dims. The display doesn't dim. English | 27 Menu system In External disc, or Auxiliary input source Dual Zone System Makes the sound different for the front channel and rear channel. Display "Zone 2 OFF" "Zone 2 ON" Setting The front and rear are the same source sound. The front and rear are the different source sound. · For amplifiers there are the model that can be set from Flat to +18 dB, and the model that can be set from Flat to +12 dB. When an amplifier that can only be set to +12 is connected to the unit, "AMP Bass +18" won't work correctly even if it's selected. B. M. S. Frequency Offset · When the Dual Zone System is on, there is only sound effect including Audio control for internal source. · When you set the Dual zone system to ON while the subwoofer preout is switched ON, the sound of the subwoofer preout isn't output. · When the source is selected to VZ-7000P/N (optional accessory), the VZ-7000P/N's sound is not output if the Dual Zone System is turned ON. Setting the central frequency boosted by B. M. S. Display "AMP FREQ Normal" "AMP FREQ Low" Setting Boost with the normal central frequency. Drop the normal central frequency 20%. News Bulletin with Timeout Setting When the Dual Zone System is OFF It switches automatically when a news bulletin starts even if the radio isn't being listened to. [. . . ] The disc magazine is not completely loaded. No disc has been loaded in the disc magazine. No disc has been loaded in the disc magazine. Nothing has been recorded on the MD. Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. [. . . ]