User manual KENWOOD KDC-MP343

[. . . ] Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. The functions you can use and the information that can be displayed may differ depending on the models being connected. 2CAUTION To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. [. . . ] Returning to the top level Press the [3] button. Scrolling the folder name display Push the Control knob toward [FM] for at least 2 seconds. 3 Decide the folder to play Press the Control knob. The Folder Select mode releases, and the Audio file in the folder being displayed plays. Cancelling the Folder Select mode Press the [F. SEL] button. English | 19 Menu system Control knob RDS indicator Menu display Menu System Setting beep sound during operation, etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 4 Exit Menu mode Press the [MENU] button. / · When other items those applicable to the basic operation method above are displayed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting. ) Also, the explanation for items that are not applicable (<Manual Clock Adjustment> etc. ) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob towards [FM] or [AM]. Example: When you want to set the beep sound select the "BEEP" display. Function of KDC-W4037/KDC-MP343 In Standby mode 3 Set the menu item Push the Control knob towards [4] or [¢]. Example: When you select "BEEP", each time you push the knob it alternates between "BEEP ON" or "BEEP OFF". You can continue by returning to step 2 and setting other items. Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. Indication of this Security Code activation prevents your precious audio unit from stealing. 20 | English / · When you activate the Security Code function, it cannot be released. Display "KEY RED" "KEY GRN" Setting The illumination color is red. The illumination color is green. Function of KDC-W4037/KDC-MP343/ KDC-W3037/KDC-W311 News Bulletin with Timeout Setting Dimmer You can lower the brightness of the display by using the dimmer function. Display "DIM ON" "DIM OFF" Setting The display dims. The tuner automatically changes when a news bulletin starts even if the radio is not being listened to. Also, you can set the time interval when interruption is prohibited. Display and Setting "NEWS OFF" "NEWS 00M" "NEWS 90M" . . . 22 | English When you set "NEWS 00M" -- "NEWS 90M", the News Bulletin Interrupt function is ON. When the News Bulletin is ON, the "NEWS" indicator is ON. When the news bulletin starts, "NEWS" is displayed, and the tuner changes to the news bulletin. Function of KDC-W4037/KDC-MP343/ KDC-W3037/KDC-W311 AF (Alternative Frequency) When the reception is poor, automatically alternate to another frequency broadcasting the same program in the same RDS network with better reception. Display "AF ON" "AF OFF" Setting The AF function is ON. The AF function is OFF. / · If you choose the "20MIN" setting, further news bulletins will not be received for 20 minutes once the first news bulletin is received. · The news bulletin volume is the same level that was set for <Traffic Information> (page 13). [. . . ] ! Disc source ? The specified disc does not play, but another one plays instead. The disc is loaded in a different slot from that specified. Eject the disc magazine and check the number for the specified disc. Try another disc instead. Audio file source ? The sound skips when an Audio file is being played. [. . . ]