User manual KENWOOD KDC-MP4026

[. . . ] In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. Attach the panel while you are on the vehicle The panel lock arm appears when the panel is removed. Therefore, the panel must be attached while the electrical system of the car is operating. 2CAUTION To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. · Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. [. . . ] "TRAC SCN"/"FILE SCN" is displayed. Folder Search Selecting the folder recorded on the Audio file media. Push the Control knob towards [FM] or [AM]. 2 Release it when the song you want to listen to is played Press the [SCAN] button. Random Play Play all the songs on the disc or Audio file folder in random order. Each time you press the button, Random Play turns ON or OFF. When the Random mode is ON, "DISC RDM"/ "FOLD RDM" is displayed. · When you push the Control knob toward [¢], the next random song starts. English | 19 CD player features Function of Audio file Text/Title Scroll Scrolling the displayed CD text or Audio file text. Push the Control knob toward [FM] for at least 2 seconds. · When the <Display Illumination Control> (page 22) is set to OFF, the display may black out while scrolling. Folder Select Quickly selecting the folder you want to hear. 1 Enter Folder Select mode Press the [F. SEL] button. During Select mode the folder information is displayed as shown below. Folder name display Displays the current folder name. 2 Select the folder level Push the Control knob towards [FM] or [AM]. With the [FM] of the Control knob, you move 1 level down and with the [AM] of the Control knob, 1 level up. Selecting a folder in the same level Push the Control knob towards [4] or [¢]. With the [4] of the Control knob, you move to the previous folder, and with the [¢] of the Control knob, to the next folder. Returning to the top level Press the [3] button. Scrolling the folder name display Push the Control knob toward [FM] for at least 2 seconds. 3 Decide the folder to play Press the Control knob. · When the display is off, pressing any key will turn on the display. · When the display is off, you cannot perform any operation except for the following: · Volume · Attenuator · Selecting the source · Ejecting the disc · Turning off the power · Dimmer Control · During function control, such as the Menu System, the display stays on. 22 | English In Audio file source Supreme Setting When AAC, MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=32k, 44. 1k, 48kHz)) are played, this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate. Processing is optimized for the compression format used (AAC, MP3, or WMA), and adjustment is made for the bit rate used. Display "SPRM ON" "SPRM OFF" Setting Plays sound using the Supreme function. Plays the original sound stored in the audio file. · This news bulletin function is only available if the desired station sends PTY-code for news bulletin or belongs to <Enhanced Other Network>-Network sending PTY-code for news bulletin. · When the News Bulletin Interrupt function is ON, the tuner changes to an FM station. In Tuner mode Local Seek Only stations whose reception is good are searched in auto seek tuning. Display "LO. S OFF" "LO. S ON" Setting The local seek function is OFF. The local seek function is ON. · The sound effect may be imperceptible depending on the relationship between the audio file format and setting. Function of the KDC-MP4026 Function of the KDC-MP4026 In Tuner mode News Bulletin with Timeout Setting The tuner automatically changes when a news bulletin starts even if the radio is not being listened to. Also, you can set the time interval when interruption is prohibited. Display and Setting "NEWS OFF" "NEWS 00M" "NEWS 90M" When you set "NEWS 00M" -- "NEWS 90M", the News Bulletin Interrupt function is ON. When the News Bulletin is ON, the "NEWS" indicator is ON. [. . . ] The disc can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. There's already another disc inserted. Press the [0] button and remove the disc. [. . . ]