User manual KENWOOD KDC-MP4033S

[. . . ] · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] Cancelling Direct Track Search During Its Operation: Press the 38 button. NOTE Track / Disc Repeat Repeat playing the current track or disc. 2 Press either the 4 or ¢ button whilst the track number is Turning Repeat Play Function On/Off: Press the REP button to switch the repeat play function on and off as follows : w Track Repeat ON w Disc Repeat ON (Function of disc changers) w You cannot use the direct track search function during random play or magazine random play. Repeat OFF "Repeat ON" / "T-Repeat ON" is displayed and the track -- 24 -- number blinks in the display when track repeat is on. "Disc Repeat ON" / "D-Repeat ON" is displayed and the disc number blinks in the display when disc repeat is on. NOTE Repeat play is cancelled when you eject the disc. Track Scan Successively play the beginning of each track on a disc until you find the track that you want to listen to. Starting the Track Scan: Press the SCAN button. "Scan ON" is displayed and the first 10 seconds of each track are played, and the tracks are played in order. The track number currently being heard blinks in the display. Stopping to Listen to the Track Being Scanned: Press the 38 or SCAN button again to stop the scan and keep on listening to a track normally. NOTE · The track scan function is cancelled when you eject the disc. · The track scan function only scans each track on a disc once. -- 25 -- CD/External disc control features Presetting Disc Names (DNPS) Store the names of discs to be displayed when played. If the disc changers that were manufactured and sold after 1997 (except for KDC-C560) are connected, you can directly input letters using the number/letter entry buttons on the remote control. Example: Use the following table to enter the name "DANCE". Character Button to press # Times pressed English 1 Play the disc whose name you want to preset. NOTE · This function is not available for disc changers that do not feature the Disc Name Preset function. · The disc name preset function cannot be used when the Magazin random play and disc title or track title is displayed. "D" "A" "N" "C" "E" the name. NOTE #3 #2 #6 #2 #3 1 1 2 3 2 2 Hold down the NAME. S button for two seconds or more. "NAME SET" is displayed and the disc name preset mode is entered. The cursor blinks in the position where character input can be made. 3 Press either the 4 or ¢ button to move the cursor to the 5 Continue steps 3 and 4 until all the characters are chosen for desired position. The 4 button moves the cursor to the left, and the ¢ button to the right. The names of all the discs in the disc changer will appear successively in the display for five seconds each. Discs whose names have not been preset will appear as "NO NAME" in the display. NOTE To scroll manually: 1 Press the DISP button to display the disc title or the track title. 2 Holding down the DISP button for one second or more results in one scrolling display of the titles. To scroll automatically: 1 Press the DISP button to display the disc title or the track title. The titles will be displayed in one scrolling display. NOTE · This function can only be used in disc changers that were manufactured or sold as of 1997. Also note that some units cannot provide a display unless the disc name preset has been made by the unit that is playing. · Discs in the disc changer that have never been played before will appear as "NO ACCESS" when the disc names are displayed. When you cannot identify a disc because of the "NO ACCESS" display after inserting a disc magazine, try playing it to display the disc name. Also note that "NO DISC" will be displayed when a disc has not been loaded. Rapid display (forward / reverse): Press the DISC+ or DISC­ button. Pressing the DISC+ button will rapidly display the preset names/disc titles in order. Pressing the DISC­ button will rapidly display the preset names/disc titles in reverse order. When the disc or track to be played changes, the title is displayed in one scrolling display. 2 Holding down the DISP button for one second or more results in one scrolling display of the titles. NOTE · Please see the menu settings (page 35) about switching between manual scrolling and automatic scrolling. [. . . ] Track repeat, disc repeat, track scan, random play, and magazine random play start by themselves. Cannot play CD-R or CD-RW The computer chip in the unit is not functioning normally. Random play or magazine random play has been selected. The setting is not cancelled. Turn off the random play or magazine random play function. The settings for these functions remain on until the setting to off or the disc ejected, even if the power is turned off or the source changed. [. . . ]