User manual KENWOOD KDC-MP6533

[. . . ] · To prevent short circuits, never put or leave any metallic objects (e. g. , coins or metal tools) inside the unit. · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. [. . . ] During Select mode the folder information is displayed as shown below. KDC-MP6533 Folder name display 3 Decide the folder to play Press the [38] button. The Album Select mode releases, and the MP3/WMA in the folder being displayed is played. The methods for moving to other folders in the album select mode are different from those in the album search mode. See <Notes on playing MP3/WMA> (page 6) for details. Canceling the Album Select mode Press the [F. SEL] button. Folder number display KDC-M9021SE/ KDC-M9021 Folder name display DNPP (Disc Name Preset Play) (Function of disc changers with remote) Selecting the CD displayed in the DNPS of the CDs set in the Disc changer. IN P/S AT T ST LOUD RDS TI Folder number display · Folder name display: Displays the current folder name. · Folder number display: Displays the number in the folder belonging to the currently selected folder. 1 Enter DNPP mode Press the [DNPP] button on the remote. When "DNPP" is displayed the DNPS display in order. 2 Select the folder level Press the [FM] or [AM] button. With the [FM] button you move 1 level down and with the [AM] button 1 level up. Forward / Reverse display Press the [DISC­] or [DISC+] button. 2 When the disc you want is displayed Press the [OK] button on the remote. The disc being displayed is played. Canceling the DNPP mode Press the [DNPP] button on the remote. -- 27 -- CD/MP3/WMA/External disc control features English Disc Naming (DNPS) Attaching a title to a CD. Characters can be entered by using a remote with number buttons. Example: If "DANCE" is entered. 1 2 Play the disc you want to attach a name to A title can't be attached to a MD. Enter Menu mode Press the [MENU] button for at least 1 second. Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "Mask key" is displayed. Enter Mask key mode Press the [4] or [¢] button for at least 1 second. "BAR BAR 1"/"TRANSMIT1" is displayed. Enter the Mask Key's signal Hold down the transmit button on the Mask Key until the full transmit level indicator lights up in the display. "BAR BAR 2"/"TRANSMIT2" is displayed. Press the Reset button and when it's removed from the battery power source 1 2 Turn the power ON The vehicle engine turns ON. "BAR BAR 1"/"TRANSMIT1" is displayed. Enter the Mask Key's signal Repeat steps 4 and 5 above, and enter the Mask Key's signal. "BAR BAR BAR"/"APPROVED" is displayed. The unit can be used. 2 3 4 Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "Beep ON" "Beep OFF" Setting Beep is heard. [. . . ] Record in conformity with the ID 3 tag version1. x. -- 46 -- Troubleshooting Guide ?? Can't enter Album Select mode. 101 There's no folder recorded in the MP3/WMA media. The songs in the selected folder aren't played in Album Select mode. 102 There are no MP3/WMA in the selected folder. Make sure there's recorded content in the MP3/WMA media. [. . . ]