User manual KENWOOD KDC-MP738U

[. . . ] KDC-X792 KDC-X692 KDC-MP738U KDC-MP638U CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D’EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. [. . . ] €DISP” > “GRAPH” of <Function Control> (page 6) “DISP” > “GMENU” of <G-Analyzer Control> (page 12) • When you cannot download the pictures to this unit, there may be a problem with the CD-R/CD-RW/USB device write method. 1 Connected the USB device Connect the USB device containing the files to be downloaded into this unit. Com describes how to make CD-R/CD-RW/USB device. 2 Select the picture downloading item during Menu mode (In Standby mode) Select the “DISP Data DL” display. for how to select Function Control items , refer to <Function Control> (page 6). 3 Enter downloading mode Press the Control knob for at least 1 second. pICTURE ENGINE Picture Engine is an application software distributed from Kenwood's official website. Utilizing this software, you can create an original still image file. 4 Select a media Push the Control knob towards right or left. 5 Enter the downloading mode Turn the Control knob to select “YES”, and then press the Control knob. 1 Select Demonstration item during Menu mode Select the “DEMO Mode” display. for how to select Function Control items , refer to <Function Control> (page 6). 6 Select files to be downloaded Turn the Control knob or push it towards up or down. 2 Set the Demonstration mode Press the Control knob for at least 2 seconds. Pressing this button for 2 seconds or longer toggles the setting between “ON” and “OFF”. 7 Start downloading Turn the Control knob to select “YES”, and then press the Control knob. 8 Exit the downloading mode Press the [FNC] button. 5 4:22:47 PM Other Functions Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate 1 Press the Release button. 2 Drawing the faceplate to left side pull it to forward and remove it. ¤ • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. € Keep the faceplate in its faceplate case while detached. [. . . ] ž Wire or insulate the speaker cable properly and press the reset button. If the “Protect” code does not disappear, consult your nearest service center. USB ERROR (Blink): Some trouble may have occurred to the connected USB device. ž Remove the USB device, then cycle the power switch to ON. [. . . ]