User manual KENWOOD KDC-MP8029

[. . . ] Setting the "O-N" Switch to the "N" position for the applicable KENWOOD disc changers/ CD players. The functions that can be used and the information that can be displayed will differ depending on the models being connected. · You can damage both your unit and the CD changer if you connect them incorrectly. 2CAUTION To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. · Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. [. . . ] Hold down on [FM] of the Control knob for at least 1 second. 18 | English Menu system SCRL + VOL AUD SET UP Q MENU OFF SCAN RDM REP PTY DISP ATT DIM TI AME MENU RDS indicator SRC Control knob Menu display Menu System Setting during operation beep sound etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 4 Exit Menu mode Press the [MENU] button. · When other items that are applicable to the basic operation method above are displayed, afterwards their setting content chart is entered. (Normally the uppermost setting in the chart is the original setting. ) Also, the explanation for items that aren't applicable (<Manual Clock Adjustment> etc. ) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob to [FM] or [AM]. Example: When you want to set the beep sound select the "BEEP" display. 3 Set the menu item Push the Control knob to [4] or [¢]. Example: When "BEEP" is selected, each time the knob is pushed it switches "BEEP ON" or "BEEP OFF". You can continue by returning to step 2 and setting other items. English | 19 Menu system Function of the KDC-W4531 In Standby mode "APPROVED" is displayed. The unit can be used. · If an incorrect code is input, "WAITING" is displayed, and the input prohibited time shown below is generated. After the input prohibited time lapses, "CODE" is displayed, and input can be done. Security Code Because authorization by the Security Code is required when it's removed from the vehicle, personalizing this unit is by using the Security Code is a help in preventing theft. · When the Security Code function is activated, it can't be released. The illumination color is green. Only stations whose reception is good are searched for in auto seek tuning. Display "LO. S OFF" "LO. S ON" Setting The local seek function is OFF. The local seek function is ON. Function of the KDC-W4531/W4031/W409/3031A/ 3031G/309A/309G In Tuner mode Function of the KDC-W4531/W4031/W409/3031A/ 3031G/309A/309G Tuning Mode Sets the tuning mode. Tuning mode Auto seek Preset station seek Manual Display "AUTO 1" "AUTO 2" "MANUAL" Operation Automatic search for a station. Search in order of the stations in the Preset memory. Normal manual tuning control. News Bulletin with Timeout Setting It switches automatically when a news bulletin starts even if the radio isn't being listened to. Also, the time interval when interrupt is prohibited can be set. . . . Synchronize Clock Display and Setting "NEWS OFF" "NEWS 00M" English | 21 Menu system Function of the KDC-W4531/W4031/W409/3031A/ 3031G/309A/309G Display "ATPS ON" "ATPS OFF" Setting The Auto TP Seek Function is ON. The Auto TP Seek Function is OFF. AF (Alternative Frequency) When poor reception is experienced, automatically switch to another frequency broadcasting the same program in the same RDS network with better reception. Display "AF ON" "AF OFF" Setting The AF function is ON. The AF function is OFF. In FM reception Monaural Reception Noise can be reduced when stereo broadcasts are received as monaural. Display "MONO OFF" "MONO ON" Setting The monaural reception is OFF. [. . . ] For the discs/folders first or last song. For each disc/folder, Track Search can't be done in the backward direction for the first song or in the forward direction for the last song. ? Cannot play an MP3/WMA. Clean the media, referring to the CD cleaning of the section on <About CDs> (page 5). The sound skips when an MP3/WMA is being played. [. . . ]