User manual KENWOOD KDC-MPV7026

[. . . ] · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] Each time the button is pressed, the displayed disc number increases by one. The repeat play function is cancelled when you stop playing the disc. Track Scan Successively play the beginning of each track on a disc until you find the track that you want to listen to. Starting the Track Scan : Press the SCAN button. "TSCN ON / T-Scan ON" is displayed and the first 10 seconds of each track are played, and the tracks are played in order. -- 22 -- The track number currently being heard blinks in the display. Stopping to Listen to the Track Being Scanned: Press the 38 or SCAN button again to stop the scan and keep on listening to a track normally. NOTE · The track scan function is cancelled when you stop playing a disc. · The track scan function only scans each track on a disc once. and off. "RDM ON / Random ON" is displayed when random play is turned on. The display of the track number changes continuously as the next track is being selected. When the track has been selected, play starts. The selected track number blinks in the display as it is being played. 2 To change the track being heard, press the ¢ button. Another track is selected and played. NOTE Disc Scan (Function of disc changers) The random play function is cancelled when you stop playing a disc. Successively play the beginning of each disc on a changer until you find the one that you want to listen to. Starting the disc scan: Press the D. SCN button. "DSCN ON / D-Scan ON" is displayed and the first 10 seconds of each disc are played, in the order in which they are loaded on the changer. The disc number currently being heard blinks in the display. Stopping to Listen to the Disc Being Scanned: Press the 38 or D. SCN button again to stop the scan and keep on listening to the disc normally. NOTE · The disc scan function is cancelled when you stop playing a disc. Up to 8 (KDC-PS9070R) / 12 (KDC-8070R/8070W/7070R) characters and 30 CDs can be registered with this unit. · Discs are identified by their total length and number of tracks. If another disc happens to have the same specifications as one that you have already stored a name for, the name will be displayed for it, too. · If you want to change the name of a disc, repeat steps 1 and 2 to display the name, and then repeat steps 3 and 4 to input the changes. · Pressing the reset button erases the disc names stored in this unit, but does not erase the names stored in a disc changer. The operation and characters that can be entered may change as listed below, depending on the unit that is connected. A press of the 38 button exits the disc name preset mode. Operations can be followed again from Step 2 at a time such as this, and the characters to be input are selected using the procedure described below. Press the DISC+ or DISC­ button to display the desired character. Besides the alphabet (capital letters only) and numbers, you can choose the following characters: /, +, ­, *, =, <, >, [ and ]. 5 Continue steps 3 and 4 until all the characters are chosen for the name. 6 Press either the NAME. S button on the main unit or the OK button on the remote control. The disc name is stored and the disc name preset mode is cancelled. If you make no entry in a 10-second period, the name will be stored with the characters input so far. -- 25 -- CD/External disc control features English Disc Name Preset Play (DNPP) Function of remote control with DNPP button If you have preset the name of a disc that you want to listen to in the disc changer, you can look for it by name and start playing it. The disc name preset play (DNPP) mode will be cancelled. 1 Press the DNPP button on the remote control. "DNPP" will appear in the display, and the disc name preset play mode is entered. [. . . ] Random play has been selected. External disc control mode PROBLEM The disc control mode cannot be selected. The specified disc does not play, but another one plays instead. POSSIBLE CAUSE No cable has been connected to the disc changer input terminal on the unit. The disc is loaded in a different slot from that specified. The disc is severely scratched. SOLUTION Connect the cable to the disc changer input terminal on the unit. [. . . ]