User manual KENWOOD KDC-PS900

[. . . ] Frequency Offset AMP Control CRSC (Clean Reception System Circuit) Receive mode Setting SIRIUS ID (ESN) display Auxiliary Input Display Setting & Station/Disc Naming Text Scroll Built-in Auxiliary input Setting CD Read Setting Voice Index ACDrive firmware version display Unique ID display Audio Preset Memory Audio Preset Call Demonstration mode Setting Tuner features Tuning Tuning Mode Direct Access Tuning Station Preset Memory Auto Memory Entry Preset Tuning 15 Basic Operations of remote 30 CD/Audio file/External disc control features 17 Playing CD & Audio file Playing External Disc Fast Forwarding and Reversing Track/File Search Disc Search/Folder Search Direct Track/File Search Direct Disc Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play Disc Random Play Folder Select Switching the Play mode Letter Seek Text/Title Scroll Accessories/ Installation Procedure 32 Connecting Wires to Terminals Installation Removing the Unit Troubleshooting Guide Specifications 33 34 36 37 40 2| English The "AAC" logo is trademark of Dolby Laboratories. English | 3 Safety precautions 2WARNING To prevent injury or fire, take the following precautions: · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. About CD players/disc changers connected to this unit KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any KENWOOD disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. [. . . ] Refer to Tuner features for how to use the functions. Selecting the station. 1 Select HD Radio source Press the [SRC] button. Select the "HD RADIO" display. 2 Select the HD FM band Push the Control knob to [FM]. Each time the knob is pushed to [FM], it switches between the HF1, HF2, and HF3 bands. Select the HD AM band Push the Control knob to [AM]. 3 Tune up or down band Push the Control knob to [4] or [¢]. 22 | English Menu system Control knob Control knob Menu System Setting during operation beep sound etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 4 Exit Menu mode Press the [MENU] button. · When other items that are applicable to the basic operation method above are displayed, afterwards their setting content chart is entered. (Normally the uppermost setting in the chart is the original setting. ) Also, the explanation for items that aren't applicable (<Manual Clock Adjustment> etc. ) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob to [FM] or [AM]. Example: When you want to set the beep sound select the "BEEP" display. 3 Set the menu item Push the Control knob to [4] or [¢]. Example: When "BEEP" is selected, each time the knob is pushed it switches "BEEP ON" or "BEEP OFF". You can continue by returning to step 2 and setting other items. (Bass Management System) Adjust the bass boost level of the external amplifier using the main unit. Display "BMS FLT" "BMS +6" "BMS +12" "BMS +18" Setting Bass boost level is flat. Bass boost level is high (+18dB). Function of the KDC-MP5028/KDC-PS900 In Standby mode Switching preout Switching the preout between the rear and subwoofer. (In subwoofer it outputs without effect from the fader control. ) Display "SWPRE R" "SWPRE SW" Setting Rear preout. Subwoofer preout. · Refer to the catalog or instruction manual for power amplifiers that can be controlled from this unit. · For amplifiers there are the model that can be set from Flat to +18 dB, and the model that can be set from Flat to +12 dB. When an amplifier that can only be set to +12 is connected to the unit, "BMS +18" won't work correctly even if it's selected. In Standby mode Built-in Amp Setting Built-in amplifier is controlled. Turning OFF this control enhances the preout quality. Display "AMP ON" "AMP OFF" Setting The built-in amplifier activates. The built-in amplifier deactivates. Function of the KDC-X589 Other than Standby mode B. M. S. Frequency Offset Setting the central frequency boosted by B. M. S. [. . . ] Please set <Receive mode Setting> to "AUTO". In digital AM broadcasting, receive mode switches between stereo and monaural too often. Receiving condition is bad or unstable. Stereo is chosen when receiving condition is good, and it switches to monaural when the condition becomes bad. [. . . ]