User manual KENWOOD KDC-U449

[. . . ] Model KDC-U449, KDC-C471FM Serial number Take the following precautions to prevent fire and avoid personal injury: · When extending the ignition wire, battery wire, or ground wire, use 0. ) are left inside the unit to avoid short circuits. If you smell or see smoke, turn the power off immediately and consult your Kenwood dealer. Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. [. . . ] Turning OFF the Power Press the [SRC] button for at least 1 second. The FM modulator is turned OFF and the radio can be heard. Be sure to turn down the volume whenever you listen to the radio or a cassette tape after stopping the disc play. During the disc play is being conducted, you are not able to receive ordinary Radio broadcasting because antenna output is switched into compact disc player`s side. It may take a little time to start receiving after you selected the SIRIUS source. You cannot operate this unit during switching Channel or Category. Each time the button is pressed the preset band switches between the SR1, SR2, SR3, and SR4. Select the channel to put in the memory Press the [4] or [¢] button. Put the channel in the memory Press the [1] -- [6] button for at least 2 seconds. the preset number display blinks 1 time. On each band, 1 channel can be put in the memory on each [1] -- [6] button. When the [¢] button is pressed, the next song select starts. This unit does not display the information of Disc title and Track title. The reference for the Menu items and their setting content is after this operation explanation. Enter Menu mode Press the [MENU] button for at least 1 second. You can continue by returning to step 2 and setting other items. exit Menu mode Press the [MENU] button. When other items that are applicable to the basic operation method above are displayed afterwards their setting content chart is entered. The unit comes with the prevention of distortion function to reduce sound distortion. If the sound is distorted severely, press the [4] or [¢] button on the display unit and then set the function to "ON". if the prevention of distortion function is set to "ON" , the sound extension is reduced. If a disc with a high recording level is used, the sound may distort even if the prevention of distortion function is set to "ON". [. . . ] Install the FM modulator unit beneath the front seat using Metal fixture and Bind head screw as shown in the above figure. To prevent fire when the ignition wire (Red) or battery wire (Yellow) is short-circuited by coming into contact with the vehicle chassis (ground), only connect the power supply after making the fuse box connections. Do not install an antenna of radio equipment or distribute the antenna wire near the changer output wire, for this could cause malfunction with this unit. Be sure to press the reset button after installation. [. . . ]