User manual KENWOOD KDC-W237S

[. . . ] CD-RECEIVER KDC-W237S INSTRUCTION MANUAL © B64-4047-00/00 (MW) B64-4047-00_00_MW_En. indd 1 07. 11. 8 5:07:55 PM Contents Before use Basic Operation General functions Tuner functions Disc play functions 3 4 Appendix 12 Accessories/ Installation Procedure 14 Connecting Wires to Terminals Installation/Removing the Unit 15 17 18 19 General Operation Audio Control Audio Setup Speaker Setting Switching Display 6 Troubleshooting Guide Specifications Tuner Operation PTY (Program Type) Program Type preset Changing Language for PTY Function 8 Music disc/Audio file Operation Folder Select 9 10 Menu Operation Menu System Manual Clock Adjustment Auxiliary Input Display Setting Demonstration mode Setting 2 | KDC-W237S B64-4047-00_00_MW_En. indd 2 07. 11. 8 5:07:57 PM Before use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The characters which can be displayed by this unit are A-Z 0-9 @ " ‘ ` % & * + – = , . [. . . ] “MENU” is displayed. 2 Select Clock Adjustment mode Press the top or bottom side of the Control knob. Select the “CLK ADJ” display. 3 Enter Clock Adjust mode Press the center of the Control knob for at least 1 second. The clock display blinks. 4 Adjust the hours Press the top or bottom side of the Control knob. Adjust the minutes Press the right or left side of the Control knob. 5 Exit Clock adjustment mode Press the [B. BOOST] button. 10 | KDC-W237S B64-4047-00_00_MW_En. indd 10 07. 11. 8 5:08:08 PM ⁄ • You can do this adjustment when the “SYNC” is set as “OFF”. Demonstration mode Setting Sets the demonstration mode. 1 Enter Menu mode Press the [B. BOOST] button for at least 1 second. “MENU” is displayed. Auxiliary Input Display Setting Selecting the display when changing to Auxiliary input source. 2 Select the Demonstration mode Press the top or bottom side of the Control knob. Select the “DEMO” display. 1 Select Auxiliary input source Press the [SRC] button. Select the “AUX” display. 3 Set the Demonstration mode Press the center of the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below. Display “DEMO ON” “DEMO OFF” Setting The Demonstration mode function is ON. Exit Demonstration mode (Normal mode). 2 Enter Menu mode Press the [B. BOOST] button for at least 1 second. “MENU” is displayed. 3 Select Auxiliary input display setting mode Press the top or bottom side of the Control knob. Select the “NAME SET” display. 4 Enter Auxiliary input display setting mode Press the center of the Control knob for at least 1 second. The presently selected Auxiliary input display is displayed. 5 Select the Auxiliary input display Press the right or left side of the Control knob. Each time you push the knob, the display alternates as listed below. • “AUX” • “DVD” • “PORTABLE” • “GAME” • “VIDEO” • “TV” 6 Exit Auxiliary input display setting mode Press the [B. BOOST] button. ⁄ • When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes. English | 11 B64-4047-00_00_MW_En. indd 11 07. 11. 8 5:08:09 PM Appendix About Audio file • Playable Audio file MP3 (. mp3), WMA (. wma) • Playable disc media CD-R/RW/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device. • Playing order of the Audio file In the example of folder/file tree shown below, the files are played in the order from ① to ⑩. CD ( Menu Glossary • SWPRE (Switching Preout) Switches the preout between rear output (“R”) and subwoofer output (“SW”). • SPRM (Supreme) Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate. Supplementing is optimized by compression format (MP3 or WMA) and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range. • CD READ Sets the method for reading CD. When unable to play special format CD, set this function to “2” to force playing. [. . . ] If the “E77” code does not disappear, consult your nearest service center. Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. And then press the reset button on the unit. [. . . ]