User manual KENWOOD KDC-W4644UY BROCHURE

[. . . ] KDC-W4544U KDC-W4644U KDC-W4044U KDC-W413U CD-RECEIVER INSTRUCTION MANUAL Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative's: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands English/00 (KEE) Contents Before use Basic Operation General functions Tuner functions Disc & Audio file play functions 3 4 Appendix 17 Accessories/ Installation Procedure 20 Connecting Wires to Terminals Installation/Removing the Unit 21 23 24 26 Menu System Clock/ Display Settings Manual Clock Adjustment Text Display Selection Auxiliary Input Display Setting 6 7 Troubleshooting Guide Specifications Audio Adjustments Audio Control Audio Setup Speaker Setting 9 Music disc/Audio file Operation Music Search Music Search for iPod All Random iPod Control by Hand Mode Direct Music Search Direct Disc Search Basic Operation of Disc Changer (Optional) 10 Tuner Operation Auto memory entry PTY (Program Type) Program Type preset Changing Language for PTY Function 13 Other Functions Activating Security Code Deactivating Security Code Demonstration mode setting 14 Basic Operations of remote control 16 The "AAC" logo is a trademark of Dolby Laboratories. iPod is a trademark of Apple Inc. , registered in the U. S. "Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. 2| KDC-W4544U/ KDC-W4644U/ KDC-W4044U/ KDC-W413U Before use 2WARNING To prevent injury or fire, take the following precautions: · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. [. . . ] 2 Do the step 5 through 6 operation, and enter the Security Code. Now, you can use the unit. 1 Select Standby Press the [SRC] button. Select the "STANDBY" display. Deactivating Security Code To deactivate the Security Code function. 2 Enter Menu mode Press the Search button for at least 1 second. "MENU" is displayed. 1 Select Standby Press the [SRC] button. Select the "STANDBY" display. 3 Select Security Code mode Press the [FM+] or [AM­] button. Select the "CODE SET" display. 2 Enter Menu mode Press the Search button for at least 1 second. "MENU" is displayed. 4 Enter Security Code mode Press the [AUD] knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed. 3 Select Security Code mode Press the [FM+] or [AM­] button. Select the "CODE CLR" display. 5 Enter Security Code Operation type Select the digits to enter Select the Security Code numbers Operation Press the [4] or [¢] button. Press the [FM+] or [AM­] button. 4 Enter Security Code mode Press the [AUD] knob for at least 1 second. When "ENTER" is displayed, "CODE CLR" is also displayed. 6 Confirm the Security Code Press the [AUD] knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed. 5 Enter Security Code Operation type Select the digits to enter Select the Security Code numbers Operation Press the [4] or [¢] button. Press the [FM+] or [AM­] button. 7 Do the step 5 through 6 operation, and reenter the Security Code. The Security Code function activates. 6 Press the [AUD] knob for at least 3 seconds. "CLEAR" is displayed. The Security Code function deactivates. / · If you enter the wrong Code in steps 5 through 6, repeat from step 5. · When the Security Code function is activated, "CODE SET" changes to "CODE CLR". · To deactivate the Security Code function, see the next section <Deactivating Security Code>. 7 Exit Security Code mode Press the Search button. / · If a wrong security code is entered, "ERROR" is displayed. Enter a correct security code. 8 Exit Security Code mode Press the Search button. 14 | KDC-W4544U/ KDC-W4644U/ KDC-W4044U/ KDC-W413U Demonstration mode setting Setting the demonstration mode as follows; Display "DEMO ON" "DEMO OFF" Setting The Demonstration mode function is ON. Exit Demonstration mode (Normal mode). 1 Enter Menu mode Press the Search button for at least 1 second. "MENU" is displayed. 2 Select Demonstration mode Press the [FM+] or [AM­] button. Select the "DEMO" display. 3 Set the Demonstration mode Press the [AUD] knob for at least 2 seconds. 4 Exit Demonstration mode Press the Search button. English | 15 Accessory of KDC-W4644U Basic Operations of remote control In Tuner source VOL SRC SRC ATT VOL ATT Band select: [FM+]/[AM­] Station select: [4]/[¢] Recall preset stations: [1] -- [6] AUD AUD FM/AM In CD/USB source Not used. Music select: [4]/[¢] Folder/Disc select: [FM+]/[AM­] 0--9 Pause/Play: [38] / General control Volume control: [VOL] Source select: [SRC] Volume reduce: [ATT] When the button is pressed again, the volume returns to the previous level. About [ ] This button is used when Bluetooth HANDS FREE BOX is connected. [. . . ] Or the unit is malfunctioning for some reason. And then press the reset button on the unit. If the "E-99" code does not disappear, consult your nearest service center. The CD player section is not operating properly. [. . . ]