User manual KENWOOD KDC-W6527SE

[. . . ] Frequency Offset AMP Control Traffic Information CRSC (Clean Reception System Circuit) Receive mode Setting Electronic Serial Number (ESN) display Auxiliary Input Display Setting & Station/Disc Naming Text Scroll Built-in Auxiliary input Setting CD Read Setting Picture downloading Audio Preset Memory Audio Preset Recall Firmware version display Demonstration mode setting Basic Operations of remote control 44 Accessories/ Installation Procedure 46 Connecting Wires to Terminals Installation Troubleshooting Guide Specifications 47 48 50 54 HD Radio control features 33 About HD Radio Tuning 2| English Safety precautions 2 WARNING To prevent injury while using this product, take the following safety precautions: · To prevent a short circuit and possible fire, never put any metallic objects (such as coins or metal tools) inside the product. · If you are the driver and your vehicle is moving, do not watch the product's display or use its controls for an extended period. · Do not use this product in any way that prevents you from driving safely. · Follow all driving laws and use common sense when using this product. [. . . ] · Be sure to insert the USB device connector as far as it will go. 1 Put the playback to pause Press the Control knob. 2 Select a device Push the Control knob towards up or down. 3 Restart playback Press the Control knob. / · This unit is compliant with Multi Card Readers with a maximum of 4 slots. · If a device is inserted during connection of the Multi Card Reader, it is not recognized. Select the Remove mode with reference to <Playing USB (iPod) device> (page 26), remove the Card Reader, and then insert the memory. Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Refer to <Selecting the Source> (page 7). Select the display for the disc player you want. Display examples: Display "CD Changer" "MD Changer" Disc player CD changer MD changer Pause and play Press the Control knob. Each time you press the knob, the audio pauses or plays. Pause and play Press the Control knob. Each time you press the knob, the audio pauses or plays. / · The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. 26 | English Fast Forwarding and Reversing Fast Forwarding Hold down toward [¢] with the Control knob. Reversing Hold down toward [4] with the Control knob. Release to resume the playback. Function of remote control Direct Music Search Doing Music Search by entering the music number. 1 Enter the music number Press the number buttons on the remote control. / · There is no sound while the Audio file is being searched. / · You can select Direct music Search up to 999. 2 Do music Search Press the [4] or [¢] button. Music Search Switching between music contained in the disc or folder being played now. Push the Control knob towards [4] or [¢]. Cancelling Direct Music Search Press the [38] button. / · This function is not available on iPod and the music edited by "Music Editor". Function of disc changer/ Audio file Function of disc changers with remote control Disc Search/Folder/Album Search Switching between folders/albums contained in the disc in the disc changer, media, or device being played now. Search in order of the channels in the Preset memory. Selecting Satellite Radio Mode Press the [SRC] button. Refer to <Selecting the Source> (page 7). / · You need to register to the service provider to receive the service by Satellite Radio. Consult the service provider if "CALL TO SUBSCRIBE" appears. · The radio may take a little time to start receiving after you select the Satellite Radio source. · If the signal reception fails, "Acquiring Signal" appears. Select the channel Selecting the channel. Push the Control knob towards [4] or [¢]. 30 | English Category and Channel Search Selecting the channel and category you want to receive. Selecting the Preset Band Push the Control knob toward [FM]. Each time you push the knob, the preset band alternates between the SR1, SR2, SR3 and SR4. 1 Enter Category and Channel Search mode Press the Control knob. 2 Select the Category Push the Control knob towards up or down. Channel Preset Memory Putting the channel in the memory. / · It is the item when the category of Middle text display part is selected. 1 Select the preset band Push the Control knob toward [FM]. 3 Select the Channel Push the Control knob towards [4] or [¢]. 2 Select the channel to put in the memory Push the Control knob towards [4] or [¢]. / · You cannot Channel search until the category information is acquired. 3 Enter Preset Memory mode Using the Control knob, select "P. MEM". For the operation method, refer to <Function Control mode> (page 10). Cancelling Category and Channel Search mode Press the Control knob. 4 Select the number to put in the memory Turn the Control knob. Function of remote control 5 Determine the number to put in the memory Press the Control knob. Direct Access Tuning Entering the channel and tuning. 6 Allow the determined number to take effect Press the Control knob. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. Cancelling the Preset Memory mode Press the [FNC] button. 2 Enter the channel Press the number buttons. / · Only the channel number is stored. Category information is not stored. 3 Do Channel Search Push the Control knob towards [4] or [¢]. Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control. / · If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. · If you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems, "Acquiring Signal" appears. English | 31 Satellite Radio tuner control features Preset Tuning Recalling the channels in the memory. 1 Select the preset band Push the Control knob toward [FM]. 2 Enter Preset Tuning Select mode Turn the Control knob. 3 Select a desired station in the memory Turn the Control knob. 4 Recall the station Press the Control knob. Cancelling Preset Tuning Press the [FNC] button. Channel Scan Checks every receivable Channel for 10 seconds. 1 Start Channel Scan Press the [AUTO] button for at least 2 seconds. The channel number display blinks. 2 Release the button when the music you want to hear is received Press the [AUTO] button for at least 2 seconds. Text Scroll for Satellite Radio source Scrolls the displayed channel name and other items. [. . . ] Change the source to any source other than USB. Connect an USB device, and change the source to USB again. For the supported USB devices, refer to <http://www. kenwood. com/usb/>. N/A Device: No Name: Waiting: No Music Data/ Error 15: · The connected USB device contains no playable audio file. · Media was played that doesn't have data recorded that the unit can play. [. . . ]