User manual KENWOOD KDC-W707

[. . . ] CD-RECEIVER KDC-W808 KDC-W707 INSTRUCTION MANUAL © B64-3142-10/01 (EW) Contents Safety precautions Notes About CDs About AAC, MP3 and WMA General features Power Hiding the Control Panel Selecting the Source Volume Attenuator System Q Speaker Setting Audio Control Audio Setup Subwoofer Output Display Setting Text Selection for Display Text Display Switching Graphic part/ Spectrum Analyzer Display Switching Faceplate Angle Adjustment Theft Deterrent Faceplate TEL Mute 4 5 7 8 9 CD/Audio file/External disc control features 25 Playing CD & Audio file Playing External Disc Fast Forwarding and Reversing Track/File Search Disc Search/Folder Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play Disc Random Play Folder Select Switching the Play mode Letter Seek Disc Naming (DNPS) Text/Title Scroll Menu system 31 Tuner features Tuning Station Preset Memory Auto Memory Entry Preset Tuning 20 RDS features Traffic Information Radio Text Scroll PTY (Program Type) Program Type preset Changing Language for PTY Function 22 Menu System Security Code Touch Sensor Tone Manual Clock Adjustment Date Adjustment Date Mode Synchronize Clock Dimmer OFF Wait Time Setting Switching preout Built-in Amp Setting Dual Zone System Setting B. M. S. Frequency Offset AMP Control News Bulletin with Timeout Setting Local Seek Tuning Mode AF (Alternative Frequency) Restricting RDS Region (Region Restrict Function) Auto TP Seek Monaural Reception External Display Control Auxiliary Input Display Setting & Disc Naming Text Scroll Built-in Auxiliary input Setting Power OFF Timer CD Read Setting Voice Index ACDrive firmware version display Unique ID display Audio Preset Memory 2| English Audio Preset Call Selecting Russian Characters Demonstration mode Setting Accessories/ Installation Procedure 40 Connecting Wires to Terminals Installation Removing the Unit Troubleshooting Guide Specifications 41 43 44 45 48 The "AAC" logo is trademark of Dolby Laboratories. English | 3 Safety precautions 2WARNING To prevent injury or fire, take the following precautions: · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. About CD players/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. [. . . ] - External CD changer/ player: Varies according to the CD changer/ player. · You can change the name of a CD by the same operation you used to name it. 3 Select the song to play Press the Control knob when the initial of the song you are searching is displayed and announced. The selected initial group plays. Disc Naming (DNPS) Attaching a title to a CD. 1 Play the disc you want to attach a name to · A title cannot be attached to MD or Audio file media. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "Menu" is displayed. 3 Select Name set mode Push the Control knob towards [FM] or [AM]. Select the "Name Set" display. 4 Enter Name set mode Press the Control knob for at least 1 second. 5 Move the cursor to the enter character position Push the Control knob towards [4] or [¢]. 6 Select the character type Press the Control knob. Each time you press the knob, the character type alternates between the types shown in the table below. English | 29 CD/Audio file/External disc control features Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob toward [FM] for at least 1 second. 30 | English Menu system MENU SRC Control knob Clock Adjust Beep:ON Security Menu System Setting beep sound during operation, etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. You can continue by returning to step 2 and setting other items. 4 Exit Menu mode Press the [MENU] button. · When other items those applicable to the basic operation method above are displayed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting. ) Also, the explanation for items that are not applicable (<Manual Clock Adjustment> etc. ) are entered step by step. · Three menu items appear on the display. The menu item displayed at the center is the one you can adjust. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "Menu" is displayed. 2 Select the menu item Push the Control knob towards [FM] or [AM]. Example: When you want to set the beep sound select the "Beep" display. 3 Set the menu item Push the Control knob towards [4] or [¢]. Example: When you select "Beep", each time you push the knob it alternates between "Beep:ON" or "Beep:OFF". English | 31 Menu system In Standby mode 2 Do the step 4 through 7 step operation, and reenter the security code. You can begin using the unit. · If an incorrect code is entered, "WAITING" is displayed, and the input prohibition periods shown in the table below is generated. After the input prohibition time lapses, "CODE" is displayed, and you can reenter the code. Security Code Because authorization by the Security Code is required when the audio unit is removed from the vehicle, personalizing this unit by using the Security Code is helpful in preventing theft. · Setup Security Code when the <Demonstration mode Setting> (page 39) is set as OFF. · When you activate the Security Code function, it cannot be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. Number of times the incorrect code was input 1 2 3 4 Input prohibited time -- 5 minutes 1 hour 24 hours 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "Menu" is displayed, "Security" is displayed. In Standby mode 3 Enter Security Code mode Press the Control knob for at least 1 second. [. . . ] Nothing has been recorded on the MD. Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. Attempted to display DNPS during the CD play having no disc names preset. [. . . ]