User manual KENWOOD KDC-X469 Instruction Manual

[. . . ] In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. KENWOOD CORPORATION 2967-3, ISHIKAWA-CHO, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0. 21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] "Scan ON" is displayed and the first 10 seconds of each track will be played, in order. The track number currently being heard blinks in the display. Stopping to Listen to the Track Being Scanned: Press the 38 or SCAN button again to stop the scan and keep on listening to a track normally. NOTE "Load" is displayed when discs are being exchanged on the disc changer. · The track scan function is canceled when you eject the disc. · The track scan function only scans each track on a disc once. Track / Disc Repeat Repeat playing the track or the disc currently being listened to. Turning Repeat Play On/Off: Press the REP button to switch repeat track/disc play on and off as follows: M Random Play Play all the tracks on the current disc in random order. 1 Press the RDM button to switch random play on and off. "Random ON" is displayed when random play is turned on. The track number will change over and over in the display as the next track is being selected. When the track has been selected, play will begin. The selected track number blinks in the display as it is being played. NOTE (For disc changers) When all the tracks on a certain disc have been played using random play, the next disc on the changer will start playing using the same function. Track Repeat ON M M Disc Repeat ON (Function of disc changers) Repeat OFF "Repeat ON"/"T-Repeat ON" is displayed and the track number blinks in the display when track repeat is on. "Disc Repeat ON"/"D-Repeat ON" is displayed and the disc number blinks in the display when disc repeat is on. NOTE 2 To change the track being heard, press the ¢ button. Another track will be selected and played. -- 22 -- NOTE 2 Pressing the DISP button for at least one second results in one scrolling display of the titles. NOTE Random play is canceled when you eject the disc. Magazine Random Play (Function of disc changers) Play the tracks on all the discs in the disc changer in random order. 1 Press the M. RDM button to switch magazine random play on and off. "M. Random ON" is displayed when magazine random play is turned on. Please see your disc changer manual for details. Up to 30 CDs can be registered with this unit. · Discs are identified by their total length and number of tracks. If another disc happens to have the same specifications as one that you have already stored a name for, the name will be displayed for it, too. · If you want to change the name of a disc, repeat steps 1 and 2 to display the name, and then repeat steps 3 and 4 to input the changes. · Pressing the reset button erases the disc names stored in this unit, but does not erase the names stored in a disc changer. -- 24 -- Disc Name Preset Play (DNPP) (Function of Remote) If you have preset the name of a disc that you want to listen to in the disc changer, you can look for it by name and start playing it. Direct Track Search (Function of Remote) Using the remote, directly input the track number that you want to listen to. 1 Using the number buttons on the remote, input the number of the track that you want to listen to. The selected track number will blink in the display for 10 seconds. If you make no further input in the 10-second period, the number entry mode will automatically be canceled. Canceling Direct Track Search While It Is Operating: Press the 38 button. NOTE 1 Press the DNPP button on the remote. "DNPP" will appear in the display, and the disc name preset play mode is entered. The preset names/disc titles of the disc in the disc changer to which you are currently listening are successively displayed for five seconds each. [. . . ] The setting is not cancelled. Turn off random play or magazine random play. The settings for these functions remain on until the setting to off or the disc ejected, even if the power is turned off or the source changed. Conduct finalization processing with CD recorder. Use a CD changer compatible with CD-R/CD-RW to play. Finalization processing is not being conducted for CDR/CD-RW. [. . . ]