User manual KENWOOD KDC-X497

[. . . ] KDC-X497 KDC-HD455U CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D’EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. [. . . ] The source changes to “USB, ” and starts transferring the tagged PSDs to the iPod/iPhone automatically. • While transferring , “TAG” flashes and “TAG STORING” appears. When all the tagged PSDs are transferred, “TAG TRANSFERD”/ “TAG TRANSFR” appears. Notes: • Your iPod/iPhone must have 50 MB free space which is required for transferring a tagged PSD. € During the transferring process: – Do not change the source. € When the connected iPod/iPhone is not compatible with iTunes Tagging you cannot transfer the tagged PSDs. 1 Open the Pandora application on your device. 2 Connect your device to the USB input terminal. USB input terminal Skip a track Create a new station 1 Press and hold the volume knob. 2 Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then press the knob. A new station is created based on the current song or artist. Save a station Press and hold number button 3, 4 or 5 to store. 3 Purchase songs from iTunes Store 1 Connect the iPod/iPhone to the PC. 2 Synchronize the iPod/iPhone on the iTunes. The tagged PSDs are transferred to the PC and iTunes displays the list of the tagged songs. After the data transfer is completed, the stored PSDs are automatically deleted from the iPod/iPhone. BALANCE FADER SUBWOOFER SET/ SUB-W SET DETAILED SET/ DETAIL SET HPF THROUGH: All signals are sent to the speakers. ; 100HZ/ 120HZ/ 150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/ 150 Hz are sent to the speakers. THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ 160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are sent to the subwoofer. REVERSE/ REV (180°)/ NORMAL/ NORM (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [LPF SUBWOOFER]/ [LPF SUB-W]. [. . . ] Indd ii ii 9/19/12 9:52:13 AM CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. jVC KENWOOD Corporation 2967-3 , ISHIKAWA-MACHI , HACHIOJI-SHI , TOKYO , JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE. Location : Top Plate FCC WARNING This equipment may generate or use radio frequency energy. [. . . ]