User manual KENWOOD KDC-X7529

[. . . ] CD-RECEIVER KDC-X7529 INSTRUCTION MANUAL © B64-2985-00/00 (MW) B64-2985-00_M_English_r0. Indd 1 04. 11. 16 6:44:59 PM Contents Safety precautions Notes About CDs About AAC, MP3 and WMA General features Power Selecting the Source Volume Attenuator Audio Control Audio Setup System Q Speaker Setting Subwoofer Output TEL Mute Faceplate Angle Adjustment Switching Display Station/Disc Naming (SNPS/DNPS) Theft Deterrent Faceplate 4 5 6 7 8 Switching the Play mode Letter Seek Text/Title Scroll Menu system Menu System Security Code Touch Sensor Tone Manual Clock Adjustment DSI (Disabled System Indicator) Selectable Illumination Dimmer Built-in Amp Setting Dual Zone System Setting B. M. S. Frequency Offset AMP Control CRSC (Clean Reception System Circuit) Auxiliary Input Display Setting & Station/Disc Naming Text Scroll CD Read Setting Voice Index ACDrive firmware version display Unique ID display Audio Preset Memory Audio Preset Call 22 Tuner/TV control features Tuning Tuning Mode Direct Access Tuning Station Preset Memory Auto Memory Entry Preset Tuning Frequency Step Setting TV Tuning TV channel Preset Memory Preset TV Tuning Direct TV Tuning 14 Basic Operations of remote 28 Accessories/ Installation Procedure 30 Connecting Wires to Terminals Installation Removing the Unit Troubleshooting Guide Specifications 31 32 34 35 38 CD/Audio file/External disc control features 17 Playing CD & Audio file Playing External Disc Fast Forwarding and Reversing Track/File Search Disc Search/Folder Search Direct Track/File Search Direct Disc Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play Disc Random Play Folder Select 2 | English B64-2985-00_M_English_r0. Indd 2 04. 11. 16 6:45:00 PM The "AAC" logo is trademark of Dolby Laboratories. English | 3 B64-2985-00_M_English_r0. Indd 3 04. 11. 16 6:45:00 PM Safety precautions 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. About CD players/disc changers connected to this unit KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. [. . . ] Select the "STANDBY" display. Number of times the incorrect code was input 1 2 3 4 Input prohibited time — 5 minutes 1 hour 24 hours 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "SECURITY" is displayed. In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Beep canceled. 3 Enter Security Code mode Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is displayed. 4 Select the digits to enter Push the Control knob to [4] or [¢]. 5 Select the Security Code numbers Push the Control knob to [FM] or [AM]. In Standby mode 6 Repeat steps 4 and 5, and complete the Security Code. Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob to [FM] or [AM]. Select the "CLK ADJ" display. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is displayed. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 8 Do the step 4 through 7 step operation, and reenter the security code. The Security Code function activates. • If you enter a Code different from your Security Code, you have to start over from step 4. 3 Adjust the hours Push the Control knob to [FM] or [AM]. Adjust the minutes Push the Control knob to [4] or [¢]. 4 Exit Clock adjustment mode Press the [MENU] button. Press the Reset button and when it’s removed from the battery power source 1 Turn the power ON. 2 Do the step 4 through 7 step operation, and reenter the security code. English | 23 B64-2985-00_M_English_r0. Indd 23 04. 11. 16 6:45:12 PM Menu system In Standby mode DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "DSI ON" "DSI OFF" Setting LED flashes. LED OFF. Other than Standby mode/ When the Dual Zone System is ON Dual Zone System Setting Setting the Front channel and Rear channel sound in the Dual Zone System. Display "ZONE2 R" "ZONE2 F" Setting Sub source (Auxiliary input source) is to be rear channel. Sub source (Auxiliary input source) is to be front channel. In Standby mode Selectable Illumination Selecting the button illumination color as green or red. Display "KEY GRN" "KEY RED" Setting The illumination color is green. The illumination color is red. Other than Standby mode B. M. S. (Bass Management System) Adjust the bass boost level of the external amplifier using the main unit. Display "BMS FLT" "BMS +6" "BMS +12" "BMS +18" Setting Bass boost level is flat. Bass boost level is high (+18dB). In Standby mode Dimmer Dimming this unit’s display automatically when the vehicle light switch is turned ON. Display "DIM ON" "DIM OFF" Setting The display dims. [. . . ] ✔ --☞ There are times when it isn’t displayed correctly according to the Audio file recording conditions. ? ? ? ? ?? 36 | English B64-2985-00_M_English_r0. Indd 36 04. 11. 16 6:45:19 PM The messages shown below display your systems condition. EJECT: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. No disc has been loaded in the disc magazine. [. . . ]