User manual KENWOOD KDC-X991 Instruction Manual

[. . . ] CD-RECEIVER KDC-X991 INSTRUCTION MANUAL HD Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KDC-X991 Serial number US Residence Only Register Online Register your Kenwood product at www. Kenwoodusa. com © B64-3767-00/00 (KW) Contents Safety precautions Notes General features Power Selecting the Source Volume Attenuator Loudness Audio Control Audio Setup Subwoofer Output Supreme Setting TEL Mute Function Control mode Sound Management system Position Control Equalizer Control WOW HD Control Memory mode Memory Recall mode Display Type Selection Status Setting Graphic Display Selection Text Display Selection The text display Font Color Selection Icon Display Switching G-Analyzer display Selection G-Analyzer Stop Watch G-Analyzer Horsepower Analysis G-Analyzer Reset G-Counter Level setting G-Analyzer Calibration setup G-Analyzer vehicle weight setup G-Analyzer vehicle class setup Station/Disc Naming (SNPS/ DNPS) Angle Control Theft Deterrent Faceplate 3 CD/Audio file (USB/iPod/ Internal Memory) control 4 features 30 8 Playing CD & Audio file Playing USB (iPod) device Playing Internal Memory Playing External Disc Pause and play Drive Search Fast Forwarding and Reversing Music Search Disc Search/Folder/Album Search Direct Music Search Direct Disc Search Play function of CD and Audio file File Select Text/Title Scroll Recording & Downloading 35 About Internal Memory Setting the recordable time Recording music CD Copying from USB device Deleting files in memory Display Illumination Control Dimmer Contrast Adjustment Display-reversing Setting Built-in Amp Setting Dual Zone System Setting B. M. S. [. . . ] Audio files can be stored by recording a music CD or copying from a USB device. To play the stored audio file, refer to <CD/Audio file (USB/iPod/Internal Memory) control features> (page 32). · Built-in flash memory 512 MB · Max. 240 tracks (Assuming that each tracks is in the 64 kbps WMA format with playback time of about 4 min. ) · Do not press the reset button or remove the battery while recording, copying, or erasing. Otherwise, the audio file in the internal memory may be lost. · The audio file in the internal memory cannot be copied to another media. · Only the following controls can be used while recording, copying, or erasing: - Volume - Attenuator - Power off / Notes on recording, copying, and erasing · Kenwood will not be responsible for the loss or damage to the music or sound data in case recording fails due to machine fault or failure. · Audio files may be lost if the engine is started while recording or copying. · Record or copy with the engine running. When recording or copying is interrupted If ACC is turned off while recording or copying, a screen to confirm whether to continue recording or copying appears next time ACC is turned on (Resume function). 1 When "Checking the condition. . . " is displayed, "Continue Ripping?" or "Continue USB Copy?" is also displayed. 2 Turn on the engine and then select "YES". Recording or copying resumes. Next page 3 English | 35 / · Resume is canceled if "CANCEL" or "NO" is selected. - "CANCEL": Press the Control knob. - "NO": Select "NO" using the Control knob. · The resume function may be disabled depending the condition of the vehicle or battery. The audio file may be lost if the resume function is disabled. Record or copy while the engine is running. Recording music CD Music CD can be compressed and stored in internal memory. CD ( Int Mem) CD000_001 CD001 CD001_003 CD001_010 When music CD is inserted / · Read <About Internal Memory> (page 35) before starting copy. · Music CD can be recorded only from the internal CD. Recording is performed at x1 speed. Setting the recordable time Set the recordable time for recording music CD. 1 Enter Mode setting Using the Control knob, select "IMPORT CD" > "MODE SET". For the operation method, refer to <Function Control mode> (page 11). 1 Insert a CD-DA Insert the music CD to record. Refer to <Playing CD & Audio file> (page 30). 2 Change to import mode Using the Control knob, select "IMPORT CD" > "IMPORT". For the operation method, refer to <Function Control mode> (page 11). 2 Set the recordable time Turn the Control knob. [. . . ] Some trouble may have occurred to the connected USB device. Change the source to any source other than USB. Remove the USB device and then reconnect it. Confirm that the software for the iPod is the latest version. [. . . ]