User manual KENWOOD KDC-X993

[. . . ] CD-RECEIVER KDC-X993 KDC-HD942U KDC-X693 KDC-MP642U INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U Serial number US Residence Only Register Online Register your Kenwood product at www. Kenwoodusa. com © B64-4416-00/00 (KW) Contents Before use Basic Operation Hands-free phoning 3 4 6 10 Function Control Display Settings Display Type Selection Text Display Selection Illumination Color Selection Auxiliary Input Display Setting Date Adjustment Date Format Selection AMP Control Demonstration mode setting Theft Deterrent Faceplate Audio Adjustments Audio Control Audio Setup 28 Sound Setup 13 Cabin selection Speaker setting DTA (Digital Time Alignment) setting X'Over setting Preset Equalizer curve select Manual Equalizer Control Preset position selection Manual position setting Audio Preset Memory Audio Preset Recall 29 Music disc/Audio file Operation Music Search Music Search for iPod Searching for Music by Initial All Random iPod Control by Hand Mode Direct Music Search Direct Disc Search Basic Operation of Disc Changer (Optional) Favorite Control 16 Favorite Preset Memory Favorite Preset Recall Favorite Preset Memory Delete Favorite Name Setting 34 Tuner Operation Auto Memory Entry Station Preset Memory Preset Tuning Direct Access Tuning PTY (Program Type) Program Type Preset Registration of a Station as a PTY Bluetooth Setup Registering Bluetooth device Registering Special Bluetooth device Registering PIN Code Downloading the Phone Book Selecting the Bluetooth device You Wish to Connect Deleting a Registered Bluetooth device Displaying the Firmware Version Adding a voice dialing command Setting a Voice Command for Category SMS (Short Message Service) Downloading the SMS 36 HD Radio tuner control Auto Memory Entry Station Preset Memory Preset Tuning Direct Access Tuning HD Radio Tagging (iTunes Tagging) 18 Operation of hands-free phoning Before Use Receiving a call During a call Call waiting Other functions Making a call Dial a number Speed dialing (Preset dial) Calling a number in the Phone Book Calling a number in the call log Make a voice dialing call Registering to the Preset Dial Number List Display of phone number type (category) 20 Satellite Radio tuner (Optional Accessory) control 41 Basic Operation Category and Channel Search Preset Memory Preset Tuning Channel Scan Direct Access Tuning Basic Operations of remote control Appendix 24 Accessories/ Installation Procedure Connecting Wires to Terminals 25 Installation/Removing the Unit Troubleshooting Guide Specifications 43 45 50 51 52 54 57 Bluetooth Audio Operation Before Use Basic Operation Other Functions Activating Security Code Deactivating Security Code Manual Clock Adjustment 2| KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U Before use 2WARNING To prevent injury or fire, take the following precautions: · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. [. . . ] For how to select Function Control item, refer to <Function Control> (page 6). 3 Select the number to put in the memory Turn the Control knob. 4 Put the Favorite Preset in the memory Press the Control knob. 2 Enter Favorite Preset Memory Delete mode Press the Control knob for at least 1 second. Cancelling the Favorite Preset Memory mode Press the [ ] button. 3 Select the number you want to delete Turn the Control knob and push the center when the desired number is displayed. Select "ALL" if you want to delete all. / · Registering the operation procedure to an existing preset number overwrites the existing procedure. · Register 6 pairs of Favorite Preset Memory. The memory cannot be erased by the Reset button. · The same memory storage operation can be used for "MENU", "SETUP", and "SOUND" in the section <Function Control> (page 6). However, some currently selected sources cannot be recalled. For information on available sources, refer to Condition column in the section <Function Control>. · If the items in the second or lower hierarchy are changed, the list in iPod will be changed by adding or deleting songs after the FAVORITE registration. Due to this, the list registered in this unit will be different from the list in iPod. The FAVORITE registration should be performed again after editing the items in iPod. 4 Turn the Control knob to select "YES", and then press the Control knob. Exit Favorite Preset Memory Delete mode. 34 | KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U Favorite Name Setting Giving a name to Preset Memory registered to Favorite. 1 Enter Preset Recall mode Turn the Control knob. 2 Retrieve the Preset Memory to change Turn the Control knob. 3 Enter Favorite Name set mode Press the Control knob for at least 1 second. Select the "FAVORITE NAME SET" display. 4 Enter the name Operation type Move the cursor to the enter character position Select the character type* Select the characters Operation Push the Control knob towards right or left. Turn the Control knob or push it towards up or down. * Each time you press the knob, the character type alternates between the types shown in the table below. Character type Alphabet upper case Alphabet lower case Numbers and symbols 5 Exit Favorite Name Set mode Push the Control knob towards right or left to select "ENTER", and then press the Control knob. Cancelling the Favorite Name set Press the [FNC] button. English | 35 Function of KDC-X993 KDC-HD942U/ KDC-X693/ KDC-MP642U with KCA-BT200 (Optional Accessory) Bluetooth Setup Registering Bluetooth device To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to five Bluetooth devices to this unit. Press the [FNC] button. / · This unit allows up to eight digits to be input for a PIN code. If a PIN code cannot be input from this unit, it can be input from the Bluetooth device. · If there are 5 or more Bluetooth devices registered, you cannot register a new Bluetooth device. · If the error message appears even though the PIN code is correct, try <Registering Special Bluetooth device> (page 36). When registering from Bluetooth devices 1 Turn on the control unit. 2 Start registering a unit by operating the Bluetooth device By operating the Bluetooth device, register the hands-free unit (pairing). Select "KENWOOD BT CD/R-2P2"/ "KENWOOD BT200" from the list of connected units. Registering Special Bluetooth device Allow registration of a special device that cannot be registered normally (pairing). 3 Enter a PIN code Input the PIN code registered as mentioned in <Registering PIN Code> (page 36). Check that registration is complete on the Bluetooth device. 1 Select Special device registration mode Select "MENU" > "SPCL DVC Select". For how to select Function Control item, refer to <Function Control> (page 6). 4 By operating the Bluetooth device, start handsfree connection. When registering from this unit 2 Enter Special device registration mode Press the Control knob for at least 1 second. [. . . ] 1. 2 Certified Frequency range : 2. 402 ­ 2. 480 GHz Output Power : +4dBm (MAX), 0dBm (AVE) Power Class 2 Maximum Communication range : Line of sight approx. 10m (32. 8 ft) Profiles : HFP (Hands Free Profile) : HSP (Headset Profile) : SPP (Serial Port Profile) : PBAP (Phonebook Access Profile) : OPP (Object Push Profile) : SYNC (Synchronization Profile) : A2DP (Advanced Audio Distribution Profile) : AVRCP (Audio/Video Remote Control Profile) Digital FM tuner section (KDC-HD942U) Frequency range (200 kHz space) : 87. 5 MHz ­ 107. 9 MHz Frequency response : 20 Hz ­ 20 kHz Signal to Noise ratio (STEREO) : 70 dB CD player section Laser diode : GaAlAs Digital filter (D/A) : 8 Times Over Sampling D/A Converter : 24 Bit Spindle speed : 500 ­ 200 rpm (CLV) Wow & Flutter : Below Measurable Limit Frequency response (±1 dB) : 10 Hz ­ 20 kHz Total harmonic distortion (1 kHz) KDC-X993/KDC-X693: 0. 008 % KDC-HD942U/KDC-MP642U: 0. 010 % Signal to Noise ratio (1 kHz) KDC-X993/KDC-X693: 110 dB KDC-HD942U/KDC-MP642U: 105 dB Dynamic range : 93 dB MP3 decode : Compliant with MPEG-1/2 Audio Layer-3 WMA decode : Compliant with Windows Media Audio AAC decode : AAC-LC ". m4a" files AM tuner section Frequency range (10 kHz space) : 530 kHz ­ 1700 kHz Usable sensitivity (S/N = 20dB) : 28 dB (25 V) Digital AM tuner section (KDC-HD942U) Frequency range (10 kHz space) : 530 kHz ­ 1700 kHz Frequency response : 40 Hz ­ 15 kHz Signal to Noise ratio (STEREO) : 70 dB Specifications subject to change without notice. English | 57 Specifications USB Interface USB Standard : USB1. 1/ 2. 0 (Full speed) File System : FAT16/ 32 MP3 decode : Compliant with MPEG-1/2 Audio Layer-3 WMA decode : Compliant with Windows Media Audio AAC decode : AAC-LC ". m4a" files Auxiliary input Frequency response (±1 dB) : 20 Hz ­ 20 kHz Input Maximum Voltage : 1200 mV Input Impedance : 10 k General Operating voltage (10. 5 ­ 16V allowable) : 14. 4 V Maximum Current consumption : 10 A Installation Size (W x H x D) : 182 x 53 x 158 mm 7-3/16 x 2-1/16 x 6-1/4 inch Weight : 3. 08 lbs (1. 4 kg) Audio section Maximum output power : 50 W x 4 Full Bandwidth Power (at less than 1% THD) : 22 W x 4 Speaker Impedance :4­8 Tone action (KDC-X493, KDC-MP442U) BAND1 (60 Hz): ±9 dB BAND2 (250 Hz): ±9 dB BAND3 (1 kHz): ±9 dB BAND4 (4 kHz): ±9 dB BAND5 (16 kHz): ±9 dB Tone action (KDC-HD942U/KDC-MP642U) BAND1 : 60 Hz - 400 Hz ±9 dB BAND2 : 630 Hz - 2. 5 kHz ±9 dB BAND3 : 4. 0 kHz - 16 kHz ±9 dB Preout level / Load (CD) KDC-X993/KDC-X693/KDC-HD942U : 4000 mV/10 k KDC-MP642U: 2500 mV/10 k Preout impedance : 600 Specifications subject to change without notice. 58 | KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U 2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0. 21 CFR 1040. [. . . ]